Passive Speakers

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

The C 12.2 is a compact, 12 "trapezoidal / two-way full-range cabinet offering very high power handling (500W continuous 2000W peak) and sensitivity of 97 dB 1W / 1m.

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

This lightweight speaker is perfect for entertainers, presenters, schools or multi-media applications, for instance. Its transparent sound is great for any type of music, but also for speech and vocals. The sound is highly defined and can hold its own under virtually all circumstances. This passive speaker is a great performer, whether at high or at low volumes. The D12 can be driven by an amplifier or a powered subwoofer, creating a compact sound system that can easily be transported in the boot of your car.

The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

Two new members have been added to the D-Lite series first introduced by DYNACORD in 2005: the D8 two-way full-range speaker system and the SUB 112 twelve-inch subwoofer. These round off the series—which has proved successful all over the world—in a harmonious fashion.Both new models in the D-Lite series are the result of a well-considered process of optimization. Their most significant features—enormous sound pressure levels, low distortion, compact dimensions and subtle styling—make the D8 and SUB112 equally suitable for mobile and fixed professional sound reinforcement applications.

The D 8 is a light‑weight, robust 8"/1", 2‑way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.

TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.

The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.

The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

FBT presents the new generation of the MaxX series, the HiMaxX, in a market where the transalpine manufacturer is already well established. No discretion, both in the size of this box and in its ability to generate "noise". Yes, but a noise rather well reproduced and extended. Your turn to judge. This series will surely benefit from the well-known image of its big sister to make a place for itself. This new line includes five models including the HiMaxX 60 equipped with a 15 "woofer and a 1.4" motor that we present.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The FBT Mitus 152 two-way passive reinforcement speaker system must include 1 x 15 "B & C neodymium woofer with 3" voice coil and 2 "B & C neodymium output with 2.5" voice coil coupled to a rotary horn 60 ° x 40 °; thanks to the rotating HF horn, it is possible to create horizontal tables of 2 speakers for a total coverage of 100 °.

Passive PA speaker for line array system, 2 x 6 inches, 500+ 150 W RMS, 2 x 16 ohms Perfectly suited to small and medium-sized indoor performances, the MITUS 206L can also be used in outdoor performances where the system is not is not directly exposed to the elements.

The Mitus has two speakers so a 1600 Watt, 4 ohm, 138dB SPL. It features a passive LF and HF internal transducer circuit protection filter, and 2 x Speakon NL with 4MDV.

FBT - ProMaxX 110, Passive speaker 300W RMS / 8OHMS, 10"/1"

The new ProMaxX comes with B&C’s world renowned compression driver technology and uses a purpose built FBT amplifier with a switch mode power supply at its heart. ProMaxX aims to combine Italian quality and style to provide you with premium quality equipment. A powerful onboard Digital Signal Processing Platform (DSP) is available to users, and the intuitive graphical interface makes it easier than ever to use. The menu driven system is located on the rear of the speaker and is navigated by a single rotary knob with push to select functionality.

Passive wooden speaker FBT VENTIS 115 2-way 500W RMS - 130db SPL equipped with a 15" (380mm) speaker + 1" motor B&C speakers

The new ProMaxX comes with B&C’s world renowned compression driver technology and uses a purpose built FBT amplifier with a switch mode power supply at its heart. ProMaxX aims to combine Italian quality and style to provide you with premium quality equipment. A powerful onboard Digital Signal Processing Platform (DSP) is available to users, and the intuitive graphical interface makes it easier than ever to use. The menu driven system is located on the rear of the speaker and is navigated by a single rotary knob with push to select functionality.

The PREMIUM PR:O series’ best-in-class acoustic properties and features set standards for others to follow. Its remarkably linear frequency response, precise attack and decay, and tremendous sound pressure certainly raise the performance bar. The audio image remains transparent, homogeneous and remarkably articulate across a very wide dynamic range.

FBT launches the next stage of the PA PROMAXX portable speaker range. With a specially designed polypropylene cabinet and sleek solid grille aesthetic, FBT's new PROMAXX represents the next step in the evolution of classic portable audio. Equipped with custom FBT drivers, featuring B&C's cutting-edge compression technology, PROMAXX combines quality and style made in Italy.

2-way professional speaker, two frequencies of small sound boxes at the level of professional surveillance. Adopt high-powered titanium treble. Matched with high-frequency 10-inch power transducers, make it 200 / 100W power when work is still easily, the medium high frequency is more powerful bright. Apply to the karaoke room, disco room and other small places of high fidelity amplification.

TS-122 best combination of dual high power 12-inch low frequency transducer and 44 basic titanium treble, which makes the power and quality of tone both get hit. 4ohms impedance and sensitivity of 100 dB. 45Hz to 20kHz frequency response. 90 ° horizontal symmetry and 45 ° vertical symmetry. 18mm high density edge, surface of the dark gray paint spray area.

400W 2-way 15-inch speaker with a professional 8ohms impedance and 100dB sensitivity. 45Hz to 20kHz frequency response. 45 ° horizontal symmetry and 90 ° vertical symmetry. 18mm MDF board and the surface of the dark gray spray paint board. Suitable to use to move the performance. Applicable for disco and KTV rooms.

2-way 600W professional speaker, in full power, low frequency is clean and powerful, the high average frequency is clear and smooth. Used mainly in the DISCO field as the main sound box, also in a long life design. 15-inch woofer with 4 ohm impedance and 100dB sensitivity. 40Hz to 20kHz frequency response. 45 ° horizontal symmetry and 90 ° vertical symmetry. 18mm high density edge enclosure with a dark gray paint surface.

TS-612 is suitable for cinema, KTV room, conference room, etc. Using 1 bass pilot in 12" and a 1.7" compression tweeter in circular polyethylene material Using 15mm plywood to do the trick. The case is lightweight and is after abrasion treatment; And it is dust free cotton glued. The frequency divider in the precise design is to optimize the vocal part. Multiple screw taps for lifting; On top, there is a 35mm diameter jack for the pole

2-way professional speaker, two frequencies of small sound boxes at the level of professional surveillance. TS-9 is a black treble frequency speaker with 1 inch and 8 inch bass.

TS-12 performances mieux que TS-10. Basse fréquence est plus puissant et adapté à la nécessité de l'utilisation de sortie haute pression du lieu. Il est indispensable à la performance à grande échelle dans le système de sortie à haute fréquence. impédance 8 ohms et une sensibilité de 100 dB. 50Hz à 20kHz réponse en fréquence. 90 ° symétrie horizontal et 45 ° symétrie vertical. 15mm enceinte de bord à haute densité.

Perfect for environments or premium space, PP-1712 is a 2-way rear speaker with a 12 "fiber-impregnated speaker and a versatile 1.34" tweeter.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 10 "fiber-impregnated speaker and a flexible 1.5" tweeter.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 15 "fiber-impregnated speaker and a flexible 1.75" tweeter.