Speakers

The Alto AEQ215 Stereo 15-Band Graphic Equalizer provides precise and reliable sound-shaping control. It is built to last and is suitable for any pro audio application, offering the essential equalizer features that you need for either straightforward spectral balancing or enhancing particular sonic characteristics. This equalizer is suitable for use in studio recording, live sound, or any other application that requires equalization.

The Alto AEQ231 Stereo 31-Band Graphic Equalizer provides precise and reliable sound-shaping control. It is built to last and is suitable for any pro audio application, offering the essential equalizer features that you need for either straightforward spectral balancing or enhancing particular sonic characteristics. This equalizer is suitable for use in studio recording, live sound, or any other application that requires equalization.

Wall element for fixing Dynacord C12.2, Black

Wall element for fixing Dynacord C15.2, Black

Protective bag for Dynacord A112/ A112 A

Aywa RCA M / 2 RCA F Adapter in plastic 

The B&C Speakers 15FW88 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

Many integrators and speaker manufacturers around the world today use either B&C Speakers speakers or motors. Since 1945, this Italian manufacturer has been a key player in the HP market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capacities and technical constraints in order to obtain the optimal result, have flawless quality control. Today B&C Speakers offers more than a quality product, a sure value. From its complete range of motors from 1" to 2" equipped with neodymium magnets, to the numerous HP models from 5cm to 54cm, each speaker like the 18PS100 is tested in extreme conditions of use. Reliability and high quality, this is the philosophy adopted by B&C Speakers

Protective bag for Dynacord TS 200W

Protective cover for Dynacord VL122

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.

The B&C DE10 is a small 1-inch motor that can be used from 2.5 kHz, it turns out to be an ideal component for building a small 2-way speaker with a small 16 or 20 cm bass/midrange. DE10 compression can also be used as a treble unit in a 3-way combination with bass and midrange. The ME10 horn is the ideal complement to the DE10 engine.

With their extended frequency response and ability to process complex audio signals, B&C DE 10-8 Ohm loudspeakers are a preferred choice of audio engineers and audio professionals seeking to achieve superior sound quality and reliable performance in all usage situations.

Protective cover for Dynacord VL152

Protective cover for Dynacord VL212

With their extended frequency response and ability to process complex audio signals, B&C DE 10-8 Ohm loudspeakers are a preferred choice of audio engineers and audio professionals seeking to achieve superior sound quality and reliable performance in all usage situations.

Latest generation of 1" motors equipped with HT Polymer diaphragms which provide a natural sound without aggressiveness. Beautiful linearity across the entire bandwidth.

B&C Speakers replacement parts are designed to ensure the durability and optimal performance of your audio equipment. Each component, whether diaphragms, cones or other parts, is manufactured with high quality materials and according to rigorous standards to ensure perfect compatibility and faithful sound reproduction. Their installation is generally simple and does not require complex techniques like soldering, making it easy to repair and keep your speakers in excellent condition. With B&C Speakers replacement parts, you can extend the life of your equipment while preserving its acoustic performance.

B&C Speakers replacement parts are designed to ensure the durability and optimal performance of your audio equipment. Each component, whether diaphragms, cones or other parts, is manufactured with high quality materials and according to rigorous standards to ensure perfect compatibility and faithful sound reproduction. Their installation is generally simple and does not require complex techniques like soldering, making it easy to repair and keep your speakers in excellent condition. With B&C Speakers replacement parts, you can extend the life of your equipment while preserving its acoustic performance.

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.

Area of ​​application of the B&C Speakers 12FW64: Use in Bass/Midrange, the B&C 12FW64 can be used in all 2-way speaker projects with a 1" motor like the DE160 and a low pass cutoff around 2KHz in 12db/ oct.

Area of ​​application of the B&C Speakers 12FW76: Use in Low/Mid, the B&C 12FW76 can be used in a high-power satellite with a large 1.4 or 2" motor but its characteristics allow it to offer a low Medium and Kick standard An Aluminum demodulation ring channels the magnetic flux of the magnet and greatly reduces distortion.

The FW88 series is perfectly balanced for today's speaker systems. A performance-oriented range of ferrite woofers with a 3.5" (88mm) voice coil and high-flux ferrite magnet, incorporated into a compact yet powerful motor package. The results are unexpected low-frequency output and midrange expansion to meet almost any two-way speaker applications. Do more, with less, with the FW88 series.

The B&C Speakers 15FW76 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

The B&C Speakers 15FW76 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

Many integrators and speaker manufacturers around the world today use either B&C Speakers speakers or motors. Since 1945, this Italian manufacturer has been a key player in the HP market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capacities and technical constraints in order to obtain the optimal result, have flawless quality control. Today B&C Speakers offers more than a quality product, a sure value. From its complete range of motors from 1" to 2" equipped with neodymium magnets, to the numerous models of 5cm 54cm loudspeakers, each speaker like the 18TBW100 is tested in extreme conditions of use. Reliability and high quality, this is the philosophy adopted by B&C Speakers

Many integrators and speaker manufacturers around the world today use either B&C Speakers speakers or motors. Since 1945, this Italian manufacturer has been a key player in the HP market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capacities and technical constraints in order to obtain the optimal result, have flawless quality control. Today B&C Speakers offers more than a quality product, a sure value. From its complete range of motors from 1" to 2" equipped with neodymium magnets, to the numerous models of 5cm 54cm loudspeakers, each speaker like the 18TBW100 is tested in extreme conditions of use. Reliability and high quality, this is the philosophy adopted by B&C Speakers

Nombreux sont les intégrateurs et les fabricants d'enceintes du monde entier à utiliser aujourd'hui soit des haut parleur ou moteurs B&C Speakers. Depuis 1945, ce fabricant italien est un acteur incontournable sur le marché du HP. Tout a été mis en œuvre pour occuper cette position de leader: Cerner le besoin avant de concevoir, analyser les capacités et les contraintes techniques afin d'obtenir le résultat optimal, disposer d'un contrôle qualité sans faille. Aujourd'hui B&C Speakers offre plus qu'un produit de qualité, une valeur sûre. De sa gamme complète de moteurs du 1" au 2" équipés d'aimants au néodyme, aux nombreux modèles de HPs de 5cm 54cm, chaque haut parleur comme le 18NBX100 est test dans des conditions extrêmes d'utilisations. Fiabilité et haute qualité, telle est la philosophie adopte par B&C Speakers

Quickly and easily setup your PA system for optimized sound with the dbx DriveRack PA2 Loudspeaker Management System. Ideal for touring bands and artists who carry their own PA system, the DriveRack PA2 gives you the best sound possible at each and every gig. A new setup wizard gets you up and playing faster and easier than ever. Updated AutoEQ and Advanced Feedback Suppression take the guesswork out of finding the perfect sound for each venue. And now all the DriveRack PA2 functions can be accessed and controlled via your preferred mobile device or laptop. Get the most out of your PA system with the dbx DriveRack PA2 Loudspeaker Management System!

The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

The ZonePro products have been created to provide state-of-the-art signal processing for commercial audio applications, while maintaining a simple, secure and intuitive interface. From the powerful DSP modules to the multiple control interfaces, the ZonePro products provide all the processing and control necessary for these installations.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

18-inch active subwoofer with 400w class D power amp.

These speakers are ideal companions for small, midsize concerts, bringing the legendary quality of DYNACORD to the budget and offering features you would never expect in this range. Equipped exclusively with high-quality components, A-Line loudspeakers stand out in their class thanks to their high-powered capabilities and 15mm thick plywood cabinets that are like light because they are rugged.

The C 12.2 is a compact, 12 "trapezoidal / two-way full-range cabinet offering very high power handling (500W continuous 2000W peak) and sensitivity of 97 dB 1W / 1m.

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

This lightweight speaker is perfect for entertainers, presenters, schools or multi-media applications, for instance. Its transparent sound is great for any type of music, but also for speech and vocals. The sound is highly defined and can hold its own under virtually all circumstances. This passive speaker is a great performer, whether at high or at low volumes. The D12 can be driven by an amplifier or a powered subwoofer, creating a compact sound system that can easily be transported in the boot of your car.

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.

The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.

Two new members have been added to the D-Lite series first introduced by DYNACORD in 2005: the D8 two-way full-range speaker system and the SUB 112 twelve-inch subwoofer. These round off the series—which has proved successful all over the world—in a harmonious fashion.Both new models in the D-Lite series are the result of a well-considered process of optimization. Their most significant features—enormous sound pressure levels, low distortion, compact dimensions and subtle styling—make the D8 and SUB112 equally suitable for mobile and fixed professional sound reinforcement applications.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

The D 8 is a light‑weight, robust 8"/1", 2‑way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

 The dual-core DSP topology employs 24-bit linear AD/DA converters and the processing is in 48-bit double-precision resolution. At >116 dB, the dynamic range of the DSP 600 is at the upper extreme of what is technically feasible – fTHD is less than 0.002%. With IIR filters and high-resolution 512-tap FIR filters, precise loudspeaker protection and a multi-stage delay concept, the DSP 600 sets new standards in the field of digital loudspeaker management. FIR-TUNE permits the use of DYNACORD speaker settings with integrated crossover and FIR filter settings for the greatest possible linearization of the magnitude and phase of the transfer function. Over IRIS-Net, any desired number of DSP 600 processors, together with other IRIS-Net capable devices, can be configured and operated swiftly and conveniently.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.

The Dynacord SH-A115 PA Speaker Dustcover is specifically designed to house and protect the Dynacord A115 and A115A PA speakers.

Under 1.15 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Under 1.18 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.

Boasting a power handling of 1000W and 4000W continuous peak, Sub 2.18 can be used universally for two-way or three-way active systems.

TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.

The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.

The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.

The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.

Spare part speaker, 400W RMS / 8Ohms, 18"

Create a powerful full-range system with the Electro-Voice ELX118P. Designed to complement your ELX powered speakers, this subwoofer's 18" low-frequency driver and 700-watt amplifier deliver abundant bass and room-filling volume. This powered sub's XLR/TRS combo input makes connection easy, and installation is easier. Getting optimal performance out of the ELX118P is effortless, thanks to its easy-to-use Subwoofer EQ switch. The Electro-Voice ELX118P's rugged wood construction is built for the road, and its light weight, built-in handles make transportation a breeze.

Electro-Voice or Dynacord ND2-8R Compression Driver.

The Electro-Voice ND6-8 is a world-class high-frequency compression driver capable of extremely high acoustic output over a wide frequency range.

The TX1181 uses the EVS-18S, a high excursion 18” woofer, coupled to well braced enclosure with large, low distortion ports, to add high impact bass response to any fullrange loudspeaker. An integrated low pass filter allows the TX1181 to be connected in parallel with a TX1122 or TX1152 on a single amplifier channel, eliminating the need for additional amplifier channels and processing.

The evolution of the FBT EvoMaxX series of speakers, FBT Evo2 Maxx Speakers fully include a new Digital Sound Processing, resulting in improved quality and sound SPL, especially in low-volume reproduction at a high volume. The sound is more natural and relaxing and the four new DSP presets offer fast dynamic equalization and contour protection for any acoustically challenging venue. Other interesting features are high ef fi ciency and cruise woofers, powerful D-Class ERS ampli fi with very low noise floor noise.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

New flagship model of the famous series of amplified speakers MaxX FBT, the HiMaxX 40a is the most advanced molded and amplified acoustic loudspeaker and claims to race very largely ahead of the competition. Small in size, the HiMaxX 40a is a concentrate of power with the appropriate technical level to exploit it. The results are there, both in quality and in sound and dynamics.

FBT presents the new generation of the MaxX series, the HiMaxX, in a market where the transalpine manufacturer is already well established. No discretion, both in the size of this box and in its ability to generate "noise". Yes, but a noise rather well reproduced and extended. Your turn to judge. This series will surely benefit from the well-known image of its big sister to make a place for itself. This new line includes five models including the HiMaxX 60 equipped with a 15 "woofer and a 1.4" motor that we present.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

Delivering optimal audience coverage with the ability to adapt to the requirements of the project at hand, HORIZON VHA represents a step forward in flexible sound reinforcement technology with exceptional sound quality. Crafted in Italy with the no-compromises manufacturing excellence for which FBT is known, the HORIZON VHA series comprises the full range VHA406A, plus two options for low-end extension in the shape of the 12” VHA112SA and 18” VHA118SA.

The FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. 

With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. 

The FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. 

With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. 

Professional amplified speaker 900W RMS, digital signal processing DSP, amplifier class D high efficiency, very low weight of only 17.4 kg, a choice of 6 preset equalizer, sound renewed FBT.

The new speaker series PROMAXX combines true quality and style made in Italy

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets