Active Subwoofers

18-inch active subwoofer with 400w class D power amp.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.

Delivering optimal audience coverage with the ability to adapt to the requirements of the project at hand, HORIZON VHA represents a step forward in flexible sound reinforcement technology with exceptional sound quality. Crafted in Italy with the no-compromises manufacturing excellence for which FBT is known, the HORIZON VHA series comprises the full range VHA406A, plus two options for low-end extension in the shape of the 12” VHA112SA and 18” VHA118SA.

Advancing the concept of line networks in terms of power, performance, weight, flexibility and ease of use, the new Mitus sound system is the real reason for our experience and our passion for excellence.

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

Large vented bass-reflex subwoofer 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil Frequency Response from 30Hz to 100Hz Class D amplifiers delivering 2000Wrms with switch mode power supply DSP with 6 EQ presets, cardioids and infra configurations, delay 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint Six FBT design aluminum handles Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base. M20 top mount stand socket Optional 4 swivel mount casters 100 mm (4’’) on request Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift Specifications: Configuration: 1 Way Built-in amplifier LF/HF: 2000w RMS Built-in amplifier peak LF/HF: 4000w Frequency response: 30Hz - 100Hz Low Frequency woofer: 2x 18" with 3" VC Maximum SPL cont/peak: 135dB / 139dB Dispersion: Omnidirectional Input impedance: 22kohm Crossover Frequency: Preset Dependent AC Power requirements: 1840VA Input connector: XLR with link out Power cord: 5m PowerCon True1 Net Dimension (WxHxD): 1000 x 549 x 730mm Net Weight: 90kg Transport Dimension (WxHxD): 1150 x 740 x 900mm Transport Weight: 102kg

The FBT SUBline 115SA is an exceptionally designed powered subwoofer, specially constructed from wood to provide unparalleled sound quality.

FBT has designed the SUBline range to complement all the brand's speakers. The SUBline 118Sa is a bass-reflex box with a 46cm (18 ") HP and amplified in 1200 watts RMS equipped with 2 XLR inputs (right and left) and 2 outputs with a switch to choose the use in "Hi" to go to a satellite speaker or "LINK" to go to other subwoofers. You can use the SUBline 118SA subwoofer to make a set of 2.1 or 2.2