The Evans EMAD bass drumhead gives you the ideal balance of punch, power, and low end. The EMAD is a 10-mil 1-ply head that employs an externally mounted adjustable damping system with two interchangeable damping rings that allow the player to adjust attack and focus. Deliver a singular oomph that'll support the fattest of backbeats, with the EMAD.

The Evans EQ3 clear drumhead gives your bass sound a controlled low-end rumble with a focused attack. Two plies of 6.5mil film, an internal overtone control ring, and a removable EQ muffle ring offer up versatility. In all, you can expect a wide dynamic range with plenty of punch and low-end spread, with the Evans EQ3 bass drumhead.

From the original EQ series with its patented internal rings and dry vents, Evans has led the way in bass drum sounds. Right out of the box, Evans bass drum heads will yield the best sound you've ever heard from your bass drum! This EQ1 resonant bas drum head combines a 7mm solid front, internal overtone control ring, and dry vents to produce an absolutely cavernous rumble that is microphone friendly.

Its two 7 mil folds offer excellent durability, wide response and large bass frequencies. A modern skin to try urgently! 2 plies of 7mil offer a wide sound and deep bass for a modern sound.

Standard Bass Drumhead, White 24''

Standard Bass Drumhead, White 26''

Featuring an outer 7mil ply, plus an inner ply of 10mil, the Evans EMAD 2 series provides you with enhanced attack, focus, and durability thanks to the unparalleled industry standard EMAD (Externally Mounted Adjustable Damping) system.

With a single ply of 10mil film that blends bright tone with greater sustain and sensitivity, the Evans G1 sets the standard for an open, expressive sound. Tune it low to get a cavernous rumble that emphasizes the natural sound of the shell.

A starting point in traditional bass drum sounds. The G1 is a 10mil single-ply head that provides bright attack, warm sustain, and a broad tuning range. The coating adds additional warmth, focus, and depth.

With a single ply 10mil film for greater balance of punch, power and low end, plus our unparalleled EMAD system for better adjustment on attack and focus, the Evans Onyx series is for drummers who want ultimate control.

Featuring an outer 7mil ply, plus an inner ply of 10mil, the Evans EMAD 2 series provides you with enhanced attack, focus, and durability thanks to the unparalleled industry standard EMAD

Controlled low-end rumble and a focused attack characterize the EQ3 bass head. Two plies of 6.5mil film with an internal overtone control ring and a removable EQ muffle ring give the head versatility. With a wide dynamic range, the EQ3 produces punch and low-end spread that solidifies the downbeat. The coated version delivers additional warmth, focus, and depth.

The EQ4 is a specific skin for use on the bass drum made with a single ply 10 thousandths thick. On the inner surface is a floating ring (10 thousandths thick) on the outer edge, which serves as a muffle and eliminates unwanted harmonics, while preserving an attack full of punch.

Reduce your sustain and get greater focus on your tonal response with the internal overtone control ring and patented UV-cured coating from the Evans UV EQ4 bass drumhead.

With a single ply of 10mil film that blends bright tone with greater sustain and sensitivity, the Evans G1 sets the standard for an open, expressive sound. Tune it low to get a cavernous rumble that emphasizes the natural sound of the shell.

If you’re a heavy hitter looking for more life to your drumhead but prefer the feel, punch, and power of a single ply, the Evans GMAD is the right choice for you.

Evans BD22G1CW Genera G1 22-inch Bass Drum Head

Evans 22" G2 Coated Bass Drum Head features excellent durability and projection power due to its two-ply design. Each ply is 7-mil thick which provides a beautiful blend of depth, sustain, and attack.

Get that deep, fat, and short pioneering sound of early 1970's rock and roll with the durable, two-ply film featured in the Evans Hydraulic series. Also easy to tune, this drumhead is perfect for troublesome drums or players with little tuning experience.

Evans EQ3 Resonant No Port drumhead series is a popular choice for both players and engineers. This drumhead features a single ply of 10mil film with a 10mil internal overtone control ring, delivering a warm and punchy sound with a controlled, short decay.

The EQ3 Timbre has a 12 cm round cutout eccentric allowing more air to escape, to give the bass drum more attack and dynamics.

Evans MS1 White Marching bass drumheads offer a traditional single-ply, 10mil film without muffling, providing the widest range of damping options. The MS1 series is very durable and projects warm, musical tones both indoors and out.

Evans MS1 White Marching bass drumheads offer a traditional single-ply, 10mil film without muffling, providing the widest range of damping options. The MS1 series is very durable and projects warm, musical tones both indoors and out.

Evans MS1 White Marching bass drumheads offer a traditional single-ply, 10mil film without muffling, providing the widest range of damping options. The MS1 series is very durable and projects warm, musical tones both indoors and out.

Evans EC series features two plies of film, an outer ply of 7mil and an inner ply of 10mil which provides a controlled sound but with resonance and sensitivity at all tuning and dynamic ranges. These drumheads incorporate Sound Shaping Technology (SST) to enhance attack and Evans Level 360 Technology for ease of tuning, extended pitch range, and optimum quality of sound.

The Evans EMAD Heavyweight. Featuring two 10mil plies, the EMAD Heavyweight drumhead gives you killer dynamics that reward you with extra punch the harder you hit it. Another thing our Sales Engineers love is the Externally Mounted Adjustable Damping system that gives the EMAD Heavyweight its name. Along with two interchangeable damping rings, this system lets you change your kick drum's focus, providing you with the added attack and thump you want.

Standard Bass Drumhead White Fiber, 22"

Standard Bass Drumhead, White Milk, 22"

Standard Bass Drumhead White milk, 26"