The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.

The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.

The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.

The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.

TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.

Two new members have been added to the D-Lite series first introduced by DYNACORD in 2005: the D8 two-way full-range speaker system and the SUB 112 twelve-inch subwoofer. These round off the series—which has proved successful all over the world—in a harmonious fashion.Both new models in the D-Lite series are the result of a well-considered process of optimization. Their most significant features—enormous sound pressure levels, low distortion, compact dimensions and subtle styling—make the D8 and SUB112 equally suitable for mobile and fixed professional sound reinforcement applications.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

This lightweight speaker is perfect for entertainers, presenters, schools or multi-media applications, for instance. Its transparent sound is great for any type of music, but also for speech and vocals. The sound is highly defined and can hold its own under virtually all circumstances. This passive speaker is a great performer, whether at high or at low volumes. The D12 can be driven by an amplifier or a powered subwoofer, creating a compact sound system that can easily be transported in the boot of your car.

18-inch active subwoofer with 400w class D power amp.

Boasting a power handling of 1000W and 4000W continuous peak, Sub 2.18 can be used universally for two-way or three-way active systems.

Under 1.18 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Under 1.15 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

The C 12.2 is a compact, 12 "trapezoidal / two-way full-range cabinet offering very high power handling (500W continuous 2000W peak) and sensitivity of 97 dB 1W / 1m.

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

These speakers are ideal companions for small, midsize concerts, bringing the legendary quality of DYNACORD to the budget and offering features you would never expect in this range. Equipped exclusively with high-quality components, A-Line loudspeakers stand out in their class thanks to their high-powered capabilities and 15mm thick plywood cabinets that are like light because they are rugged.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

The D 8 is a light‑weight, robust 8"/1", 2‑way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.

 The dual-core DSP topology employs 24-bit linear AD/DA converters and the processing is in 48-bit double-precision resolution. At >116 dB, the dynamic range of the DSP 600 is at the upper extreme of what is technically feasible – fTHD is less than 0.002%. With IIR filters and high-resolution 512-tap FIR filters, precise loudspeaker protection and a multi-stage delay concept, the DSP 600 sets new standards in the field of digital loudspeaker management. FIR-TUNE permits the use of DYNACORD speaker settings with integrated crossover and FIR filter settings for the greatest possible linearization of the magnitude and phase of the transfer function. Over IRIS-Net, any desired number of DSP 600 processors, together with other IRIS-Net capable devices, can be configured and operated swiftly and conveniently.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

Wall element for fixing Dynacord C15.2, Black

Wall element for fixing Dynacord C12.2, Black