Dynacord's Paramus is a series of installation of power amplifiers that have been designed for the scope of reinforcement of its concert, background music, messaging, and for alert and evacuation systems in the event of fire. The series consists of 5 universal and reliable models with a capacity of 160 to 450 watts.

power output: 480W

One microphone signal input, line signal input and AUX, two remote microphone inputs.

Separated treble, bass and volume control. Master Volume Control.

Selectable recording signal, internal signal input and external signal selection.

When the START and GND short circuit is short, the emergency information will be broadcasted all the time, it will only stop when the user stops it manually. PULSE and GND trigger the short circuit once, the emergency information plays five times and then stops.

With the 24V input function, the rechargeable battery is 45-60 A / h, the charging current is 2-5 A.

With the 5-zone line detection function, press the corresponding button to perform real-time detection. It can define the test frequency: test every 10 minutes, 12 hours or 24 hours. If there's a foul line when there's a buzzer.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

The FP series amplifier is a 2U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 balanced universal XLR mic inputs with phantom power. The 120W rated power amplifier. There are 4 audio source selectors on the front panel. 4 RCA-type AUX inputs are located on the rear panel.

60W desktop mixer amplifier with cooling and muting function. MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2, 3 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 416 ohm speaker output. 120 or 230 V AC operation. Mic13, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.

MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2 by 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 4-16 ohm speaker output. AC 120V or 230V operation. Mic1-2, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.

Amplifier includes 3 microphone inputs, 2 auxiliary inputs and one EMC input. It has a USB port and a fluorescent screen to display the sound number. It is suitable for the exchange and background music system. It has high temperature, overload and short circuit protection.

ITC - T-120AP, Mixer amplifier with cooling and muting desktop, power 120W120W amplifier desktop mixer with cooling and muting function. MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2, 3 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 416 ohm speaker output. 120 or 230 V AC operation. Mic13, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.

The basic PA mixer amplifier with 60W nominal power. They are presented with 3 microphone inputs, 2 inputs and 1 at the EMC inputs. priority mute is performed by EMC1 for compelling reasons other inputs except Mic1 on the front panel. Individual gain controls are provided for Mic 1-3 and 1-2 Aux, bass and treble and master volume control are provided for overall tone control. 70V, 100V and low impedance speaker outputs 4-16 ohms are provided. Extensive protection against short circuit, overload and high temperature.