Sennheiser - HSP 4, Wireless Headworn Microphone
Availability:
Code : HSP4XXXXXX
$1,063.79

Capture and transmit crystal clear audio with the Sennheiser HSP 4 headworn mic and your preferred Sennheiser wireless microphone system. This discreet mic features an 8.4mm cardioid microphone capsule, a comfortable headworn/neckband design, and a built-in windscreen to keep plosives down while the mic is in use. The mic's cardioid polar pattern rejects most side and background noise, keeping your signal focused and clean. The HSP 4 employs a locking 3-pin connector that works with many different Sennheiser bodypack transmitters, and the boom can be switched out for the optional HSP 2 boom mic, as well.

Quantity

Availability product:
In Stock
 

Garanties sécurité (à modifier dans le module "Réassurance")

 

Politique de livraison (à modifier dans le module "Réassurance")

 

Politique retours (à modifier dans le module "Réassurance")

Sennheiser - HSP 4, Headworn Microphone for Wireless

Informations

Capture and transmit crystal clear audio with the Sennheiser HSP 4 headworn mic and your preferred Sennheiser wireless microphone system. This discreet mic features an 8.4mm cardioid microphone capsule, a comfortable headworn/neckband design, and a built-in windscreen to keep plosives down while the mic is in use. The mic's cardioid polar pattern rejects most side and background noise, keeping your signal focused and clean. The HSP 4 employs a locking 3-pin connector that works with many different Sennheiser bodypack transmitters, and the boom can be switched out for the optional HSP 2 boom mic, as well.

Characteristics

- Excellent feedback rejection

- Microphone includes a detachable cap as integral wind/popshield

- Individually adjustable to all head sizes

- Neckband design keeps the microphone clear from shirt-collar or clothing

- Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side

- Microphone boom is adjustable in length and angle

- Flexible gooseneck section

- Connection cable can easily be interchanged

- All metal parts coated in a physical vapour deposition process

- Can also be used with the omni-directional HSP 2 boom microphone

Specifications

- Frequency response: 40 - 20 000 Hz

- Diameter: capsule: 8,4 mm

- Diameter: boomarm: 2,4 mm

- Sensitivity in free field, no load (1kHz): 4 mV/Pa

- Nominal impedance: 1000 Ω

- Min. terminating impedance: 4700 Ω

- Equivalent noise level: 37 dB(A)

- Maximum sound pressure level (passive): 150 dB

- Current consumption: ca. 250 µA

- Operating voltage (stand alone): 4,5 - 15 V

- weight : 9,2g.

HSP4XXXXXX
9000000018068

Specific References

No customer reviews for the moment.

Add a review

Your email address will not be published.Required fields are marked*

Related Products