The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera.

T-2221 is a dual-source music player, built in AM / FM tuner. CD player, MP3, tuner and integrated remote control. USB and SD inputs on the front panel for MP3 player and an AM / FM tuner each with 99 bands.Two florescent screens for display in English CD / MP3 and a separate tuner.

Mixer with 6 speaker selector of source selection area and zone control. Built-in microphone and recorder for recording and storing voice messages easy. High-chime, including remote trigger and volume is provided. Volume control is provided for the microphone, music, mater, record and broadcast messages, lower and treble tone control. Indications include zone selector, source selector, recording status, power, and output level meters. 4 priority levels from top to bottom: remote paging console, Mic1, chime, pre-recorded message broadcast.

2 channel mixer with 10 inputs and every 10 inputs with mic, line and high pass filter selector. Built-in 2/4 pre-series chime, remote chime trigger and local trigger on the front panel. The volume controls are provided above chime, MIC1, inputs 2-10, channel 1 and channel 2 masters. Bass and treble tone control are provided for both channels 1 and 2.

T-2129 is CD player with SD / USB inputs that support CD / MP3 discs. remote control to change input models whether SD or USB. Automatic read SD card when no disk input or USB is used. Stereo left channel and right channel output.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

Wide voltage input. No-load power: <0.5W. Single output, short circuit protection. Efficient and reliable. According to the different regions, self-optional AC power cables. Suitable models: TS-0221, TS-0670HY

Short Microphone Stand, telescopic. 

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The T-774HWP is an integrated 70 wall bracket / 100V loudspeaker transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows an easy parallel connection of several loudspeakers. The 4" 1.5" 2-way speaker driver is designed from 80 Hz wide frequency response to 20 kHz, the power of the multiple plugs 2.5, 5, 10 and 20W are useful for different applications varies from the size of the room and an ambient noise environment. The metal grille, ABS housing and stainless steel mounting bracket are white in color. Easy and secure wall bracket installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in hotels, schools, offices and factories where background music and pagination are required.

Universal microphone clamp, Black

Y010, Jack / Jack Cable 3m

Male Mono Jack / Male Mono Jack 30 cm - White

Male Mono Jack / Male Mono Jack 30 cm - Orange

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit 0

Audio adapter from 1/4″ stereo female Jack to 1/4″ stereo  female Jack

stereo male Jack / stereo male Jack, 6m

Yellow Cable - ECO K09-3, 2 Male RCA / 2 Male XLR, 3m

Aywa - Y059, stereo jack male / XLR male 1m

Metal - 6m Jack/Jack spring Cable

Digital Mixer Amplifier with MP3/TUNER/Bluetooth, used for background music playback of small and medium-sized indoor venues such as small and medium-sized supermarkets, shopping malls, and leisure cafes.

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.