Mixer with 6 speaker selector of source selection area and zone control. Built-in microphone and recorder for recording and storing voice messages easy. High-chime, including remote trigger and volume is provided. Volume control is provided for the microphone, music, mater, record and broadcast messages, lower and treble tone control. Indications include zone selector, source selector, recording status, power, and output level meters. 4 priority levels from top to bottom: remote paging console, Mic1, chime, pre-recorded message broadcast.

The T-6240 is a pre-public address with eight line level inputs, one unbalanced MIC input, and two EMC (priority) level inputs. Each of the eight input channels can be selected via pushbuttons on the front panel for use with the MIC input, so the T-6240 can be used on the channel page. Priority mute is performed via EMC1-2 inputs for compelling reasons from other inputs except Mic1. Individual gain controls are provided for each channel and MIC inputs.

2 channel mixer with 10 inputs and every 10 inputs with mic, line and high pass filter selector. Built-in 2/4 pre-series chime, remote chime trigger and local trigger on the front panel. The volume controls are provided above chime, MIC1, inputs 2-10, channel 1 and channel 2 masters. Bass and treble tone control are provided for both channels 1 and 2.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

Wide voltage input. No-load power: <0.5W. Single output, short circuit protection. Efficient and reliable. According to the different regions, self-optional AC power cables. Suitable models: TS-0221, TS-0670HY

The T-6227 is a CD player and integrated switch that can provide an ideal small sound solution to large venues such as mosques, schools, hotels and factories at stadium and air stations.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The T-521UP wireless microphone kit consists of a base unit, a handheld and a lavalier microphone - included. The kit has a separate volume control for each microphone and supports up to 32 simultanious frequencies.

The T-774HWP is an integrated 70 wall bracket / 100V loudspeaker transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows an easy parallel connection of several loudspeakers. The 4" 1.5" 2-way speaker driver is designed from 80 Hz wide frequency response to 20 kHz, the power of the multiple plugs 2.5, 5, 10 and 20W are useful for different applications varies from the size of the room and an ambient noise environment. The metal grille, ABS housing and stainless steel mounting bracket are white in color. Easy and secure wall bracket installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in hotels, schools, offices and factories where background music and pagination are required.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

D'Addario American Stage Series Cables are designed to reproduce the natural tones of your instrument with zero interference. With audiophile quality wire, which is made in the USA, the low 28pF/ft. capacitance is the sweet-spot for uncolored tone and the 22AWG oxygen-free copper conductor provides exceptional signal transfer. Full coverage comes from using 95% tinned copper braiding, eliminating handling noise and rejecting interference. Using only the finest materials, custom designs, and precision USA manufacturing methods, American Stage delivers a professional performance cable. The result is pure, natural tone guaranteed for life.

The D'Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection.

Digital Mixer Amplifier with MP3/TUNER/Bluetooth, used for background music playback of small and medium-sized indoor venues such as small and medium-sized supermarkets, shopping malls, and leisure cafes.

Standard rack mounted design (1U), SMT technology.

Support mp3/TUNER/Bluetooth remote control function, and the remote control distance is up to 8 m.

With USB interface and SD card interface, integrated MP3 player module, with automatic priority playing audio function, and digital screen can display the currently playing music of USB.

Integrated Bluetooth module to support to play music via Bluetooth mobile phone.

Ti-240TB is a mixer amplifier with MP3 / TUNER / Bluetooth Designed for background music broadcasting in small supermarkets, shopping malls, leisure cafes and other small indoor rooms.