Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

The FBT SUBLINE 118S is an extremely compact bass-reflex design subwoofer with high SPL and punch. The FBT SUBLINE 118S feature 0,70" birch plywood construction covered in a scratch resistant black paint with two aluminum carrying handles; an M20 top mounted stand adapter allows satellite speakers, such as the FBT speaker series and others, to placed above the subwoofer cab. The FBT SUBLINE 118S features a 18" high excursion magnet woofer with 3" voice coil. The FBT SUBLINE 118S is able to produce a max SPL of 136dB and handles 1200W RMS. The control panel features 2 x Neutrik Speakon NL4MD-V connectors. External digital processor required: FBT DLM26 Digital Loudspeaker Management.

FBT has designed the SUBline range to complement all the brand's speakers. The SUBline 118Sa is a bass-reflex box with a 46cm (18 ") HP and amplified in 1200 watts RMS equipped with 2 XLR inputs (right and left) and 2 outputs with a switch to choose the use in "Hi" to go to a satellite speaker or "LINK" to go to other subwoofers. You can use the SUBline 118SA subwoofer to make a set of 2.1 or 2.2

The FBT VENTIS 115MAbi-amplified speaker feature 0,59" birch plywood costruction covered in a scratch & scuff resistant black finish. The FBT VENTIS 115MAis a two way design incorporating a 15" coaxial custom woofer with 2,5" voice coil and 1" exit throat B&C with 1,7" voice coil. With a frequency range of 50Hz - 20kHz provides hi fedelity sound for both speech and music applications with a maximum SPL of 132dB. The biamplified FBT VENTIS 115MA features 700W RMS low frequency amp and 200W RMS high frequency amp. DSP on board is both user friendly and powerful; a total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own design, using 5 parametric equalizers per slot. Control panel features balanced XLR/Jack input, XLR link out, 2 x volume, RCAstereo input, DSP display with rotative encoder and push, The optional mounting bracket allow the FBTVENTIS 115MAspeaker to be surface mounted on wall or ceilings. Thanks to the integrated steel pole mount, the FBTVENTIS 115MAcan be turned into a standard speaker in vertical configuration with a few simple moves.

The USB mixer amplifiers have power ratings from 60W, 120W to 240W. They are featured of three microphone inputs, two aux inputs and one EMC input. Priority muting is achieved via EMC input for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

The ITC TS-9000S is an open programming control platform with the latest 32-bit integrated preloader and up to 210 MHz processing speed, 8 inputs and outputs, 8 relay ports, volume control and one 232, RS485, RS422. Supports 3 TS-NET control buses.

The Rode VideoMic Pro R's integrated Rycote Lyre shockmount system isolates the microphone's capsule and electronics from its mount, giving you immunity to vibrations that may result in muddy-sounding audio. Whether you're hand-holding, or your camera is tripod- or steadicam-mounted, vibrations can find their way to your mic and ruin an otherwise good shot. The Rycote shockmount stops those vibrations completely. Constructed from a single piece of rugged thermoplastic, the Lyre provides better acoustic suspension than traditional elastic shock mounts - plus, it will never sag, break, or wear out.

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. 

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera.

T-2221 is a dual-source music player, built in AM / FM tuner. CD player, MP3, tuner and integrated remote control. USB and SD inputs on the front panel for MP3 player and an AM / FM tuner each with 99 bands.Two florescent screens for display in English CD / MP3 and a separate tuner.

Mixer with 6 speaker selector of source selection area and zone control. Built-in microphone and recorder for recording and storing voice messages easy. High-chime, including remote trigger and volume is provided. Volume control is provided for the microphone, music, mater, record and broadcast messages, lower and treble tone control. Indications include zone selector, source selector, recording status, power, and output level meters. 4 priority levels from top to bottom: remote paging console, Mic1, chime, pre-recorded message broadcast.

2 channel mixer with 10 inputs and every 10 inputs with mic, line and high pass filter selector. Built-in 2/4 pre-series chime, remote chime trigger and local trigger on the front panel. The volume controls are provided above chime, MIC1, inputs 2-10, channel 1 and channel 2 masters. Bass and treble tone control are provided for both channels 1 and 2.

T-2129 is CD player with SD / USB inputs that support CD / MP3 discs. remote control to change input models whether SD or USB. Automatic read SD card when no disk input or USB is used. Stereo left channel and right channel output.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

Wide voltage input. No-load power: <0.5W. Single output, short circuit protection. Efficient and reliable. According to the different regions, self-optional AC power cables. Suitable models: TS-0221, TS-0670HY

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The T-774HWP is an integrated 70 wall bracket / 100V loudspeaker transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows an easy parallel connection of several loudspeakers. The 4" 1.5" 2-way speaker driver is designed from 80 Hz wide frequency response to 20 kHz, the power of the multiple plugs 2.5, 5, 10 and 20W are useful for different applications varies from the size of the room and an ambient noise environment. The metal grille, ABS housing and stainless steel mounting bracket are white in color. Easy and secure wall bracket installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in hotels, schools, offices and factories where background music and pagination are required.

Digital Mixer Amplifier with MP3/TUNER/Bluetooth, used for background music playback of small and medium-sized indoor venues such as small and medium-sized supermarkets, shopping malls, and leisure cafes.

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.

The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.

Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.

A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.