With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

The FBT MITUS 218S, 2 x 18" large vented bass-reflex subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBTMITUS 206 Line array for ground stack applications with optional MTB206 metal base.

Large vented bass-reflex subwoofer 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil Frequency Response from 30Hz to 100Hz Class D amplifiers delivering 2000Wrms with switch mode power supply DSP with 6 EQ presets, cardioids and infra configurations, delay 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint Six FBT design aluminum handles Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base. M20 top mount stand socket Optional 4 swivel mount casters 100 mm (4’’) on request Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift Specifications: Configuration: 1 Way Built-in amplifier LF/HF: 2000w RMS Built-in amplifier peak LF/HF: 4000w Frequency response: 30Hz - 100Hz Low Frequency woofer: 2x 18" with 3" VC Maximum SPL cont/peak: 135dB / 139dB Dispersion: Omnidirectional Input impedance: 22kohm Crossover Frequency: Preset Dependent AC Power requirements: 1840VA Input connector: XLR with link out Power cord: 5m PowerCon True1 Net Dimension (WxHxD): 1000 x 549 x 730mm Net Weight: 90kg Transport Dimension (WxHxD): 1150 x 740 x 900mm Transport Weight: 102kg

The FBT MITUS 118S, 18" compact vented band-pass subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206L line array for ground stack applications with optional metal base. The FBT MITUS118S shall meet the following performance criteria: Frequency response of 36Hz to 200Hz,Frequency sensitivity of 101dB, Maximum SPL of 138dB peak, Recommended power amplifier 1000W RMS/4 Ohm. The FBT MITUS 118S feature 0.70" Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter and two FBT design aluminium handles. The rear facing input panel provides 2 Neutrik NL4 speakon female connectors. 

The DC1 range of modular ceiling loudspeakers can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction. It includes three 6W single cone speakers with a choice of opening angle and two high-performance coaxial speakers of 12 and 24W. 

The DP1-UC10E-1 is a powerful 10W sound projector for high-quality voice and music reproduction in indoor and outdoor applications. The advanced design is suitable for both modern and traditional style environments. The sound projector is suitable for use in voice alarm systems.

PM502 comes in a very modern and user‑friendly design. It combines finest analogue input circuitry and operating surface with the advantages of its digital master and amplifier section, made for a new dimension of flexibility in its class.

Speaker wall bracket, L-arm with Ø 25 mm bracket. Horizontally adjustable, For Jolly 8 and J-8 series speakers, Colour: Black

The FBT Project 315WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possiblity of an 8 Ohm connection. An exclusive fully adjustable support bracket provides a flexible mounting system for virtually any application. The low frequency section is a 3.5" woofer and the high frequency section is a 0.5" tweeter. Ideally suited for all applications requiring high quality sound reproduction, for use in restaurants, clubs, churches, schools, conference rooms and hotels.

The FBT Project 315WHT / BT bidirectional loudspeaker is equipped with a 100V line transformer and offers the possibility of an 8 Ohm connection. An exclusive fully adjustable bracket provides a flexible mounting system for virtually any application. The low frequency section is a 3.5" woofer and the high frequency section is a 0.5" tweeter. Ideal for all applications requiring high quality sound reproduction, for use in restaurants, clubs, schools, conference rooms and hotels.

The FBT Project 550WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possiblity of an 8 Ohm connection. An exclusive fully adjustable support bracket provides a flexible mounting system for virtually any application. The low frequency section is a 5" woofer and the high frequency section is a 0.75" tweeter. Ideally suited for all applications requiring high quality sound reproduction, for use in restaurants, clubs, churches, schools, conference rooms and hotels.

The FBT MITUS 115Atwo-way bi-amplified speaker system shall incorporate 1 x 15” B&C neodymium woofer with 3” voice coil and 1” exit B&C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 115A shall meet the following performance criteria: Frequency response of 46Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. The FBT MITUS 115Aprovides a DSP with 8 EQ presets. The FBT MITUS 115A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.

Steeped in classic Italian design and acoustic expertise, VERTUShas been created with the aim of extending true line array technology, an undisputed success in the field of professional audio, into a new range of applications within both the live and fixed installation fields. The column system is compact and elegant, with a refined yet functional design. Most importantly it offers an uncompromising quality capable of successfully solving applications where conventional systems are inadequate.

The FBT Mitus 118FS and FSC are cardioid arrayable and flyable Passive Subwoofers. Designed and manufactured by FBT’s renowned engineers and artisans, the Mitus 118FS/FSC is a prime example of audio perfection with ergonomic innovations.

The Muse 118FSA is a true reversible flyable subwoofer.  Designed and manufactured by FBT’s renowned engineers and artisans, the Muse 118FSA is a prime example of audio perfection with ergonomic innovations.  The Muse 118FSA is a hybrid loaded 18’’ neodymium subwoofer designed to suspend from the Muse flybar either facing forward or rearward.  When flown facing rearward, the sub’s user removable grille can be moved by the user to the new “front” of the enclosure and the amplifier module can be moved to the new ‘rear’ of the enclosure, thus obtaining aesthetic consistency when flown with additional forward facing Muse 118FSA’s.  Thus, when creating a cardioid sub package, no additional hardware is needed to easily achieve sleek visual continuity.

A true line array system encompassing advanced technology and refined Italian engineering – these are the principles behind MUSE, a new sound reinforcement solution from FBT that redefines the modern line array in terms of power, size, light weight, flexibility and ease of use. True modularity means that MUSE is ready for any application, from a small installation using two enclosures to a large outdoor concert deploying 16 speakers per hang.

The FBT Project 320WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possiblity of an 8 Ohm connection. An exclusive fully adjustable support bracket provides a flexible mounting system for virtually any application. The low frequency section is a 3.5" woofer and the high frequency section is a 0.5" tweeter. Ideally suited for all applications requiring high quality sound reproduction, for use in restaurants, clubs, churches, schools, conference rooms and hotels

The FBT Project 320WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possiblity of an 8 Ohm connection. An exclusive fully adjustable support bracket provides a flexible mounting system for virtually any application. The low frequency section is a 3.5" woofer and the high frequency section is a 0.5" tweeter. Ideally suited for all applications requiring high quality sound reproduction, for use in restaurants, clubs, churches, schools, conference rooms and hotels

Stainless steel column, telescopic, with M20 thread Steel construction.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

The KA 2403 is a power amplifier designed for improved quality, stability and reliability. All equipped with Stereo-parallel-bridge operation mode, dB sensitivity switch ( 26-29-32dB ), limiter, ground lift, XLR/Jack inputs ( plus extra RCA input on KA 802 ), speakon/binding posts outputs.

The Kempton KA Series Power Amplifiers are designed and engineered by FBT, Italy. The Kempton KA 3002 features Class H, 2 step circuitry in a 2 rack space design, 18.1" deep. The KA 3002 is both fan cooled and passively cooled with all output components directly mounted to the heat sinks to provide optimum cooling and prevent thermal shutdowns.  

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.