The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

Aywa - Y050, Mini stereo male jack / 2 male RCA 3m

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

Single Jack Male / XLR Female 3m

RCA male / male mono jack 3m

Professional cable suitable for the stage. International reference card

Jack mono male / XLR female 10m

Aywa - Y020, Cable Jack / Jack 3m

Jack / Jack 3m

Advancing the concept of line networks in terms of power, performance, weight, flexibility and ease of use, the new Mitus sound system is the real reason for our experience and our passion for excellence.

FBT presents the new generation of the MaxX series, the HiMaxX, in a market where the transalpine manufacturer is already well established. No discretion, both in the size of this box and in its ability to generate "noise". Yes, but a noise rather well reproduced and extended. Your turn to judge. This series will surely benefit from the well-known image of its big sister to make a place for itself. This new line includes five models including the HiMaxX 60 equipped with a 15 "woofer and a 1.4" motor that we present.

This Italian manufacturer of PA speakers has an experience of more than forty years ... it shows and especially it means. While maintaining the tradition that makes FBT a unique brand, this manufacturer is very attracted by the future. Surrounding itself with the best European suppliers, each component of the FBT loudspeakers is carefully chosen from a wide range of very high quality products. After the traditional wooden loudspeakers with the clear sound, the inevitable molded active speakers of the MaxX series, FBT has developed the UNIQUE Line Array system in a single speaker, proving once again its ability to combine development and audio aesthetics

The Mitus has two speakers so a 1600 Watt, 4 ohm, 138dB SPL. It features a passive LF and HF internal transducer circuit protection filter, and 2 x Speakon NL with 4MDV.

The FBT Mitus 152 two-way passive reinforcement speaker system must include 1 x 15 "B & C neodymium woofer with 3" voice coil and 2 "B & C neodymium output with 2.5" voice coil coupled to a rotary horn 60 ° x 40 °; thanks to the rotating HF horn, it is possible to create horizontal tables of 2 speakers for a total coverage of 100 °.

New flagship model of the famous series of amplified speakers MaxX FBT, the HiMaxX 40a is the most advanced molded and amplified acoustic loudspeaker and claims to race very largely ahead of the competition. Small in size, the HiMaxX 40a is a concentrate of power with the appropriate technical level to exploit it. The results are there, both in quality and in sound and dynamics.

Aywa - Y021, Cable Jack / Jack 6m

Yellow Cable - ECO G610D, Jack / Jack Cable 10m

Aywa - A018,  Jack / Jack Cable Phone 6m

Professional cable suitable for the stage

International reference card

Mixer Amplifier T-6635 is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

Mixer amplifier is applicable in the bank, mosque, school, hotel, restaurant, theme centers and shopping center. It integrates 2 audio sources into a 5-zone mixer amplifier, plus 3 microphones and an additional auxiliary input. 2 USB ports on the front and rear panel provide easy access and operation of the installer and the end user.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 universal microphone inputs of 1/4 "phone jack and XLR type. Double RCA type line are also provided.The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which ensure the control of the flexible zone.Every 6 inputs are equipped with low / tone controls. A T-318 of the remote zone exchange console 5 is provided for the announcement and control of another location.Master, Mic1-4, volume control line1-2 & 6 separate treble / bass Tone control for each input are provided, as well as microphone 1 priority over the other inputs Each channel input with separate treble and bass control Built -Family for fire alarm system, EMC input , integrated chime, 2/4 tone chime selector, chime remote trigger. The TEL entry could be used as a telephone system on a public address system. The REC output for tape recorder and the PRE output, AMP input for adding processo r additional signal as mixer, graphic equalizer. Complete protection includes short circuits and thermal protection, current limiter and overload.