The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

Advancing the concept of line networks in terms of power, performance, weight, flexibility and ease of use, the new Mitus sound system is the real reason for our experience and our passion for excellence.

FBT presents the new generation of the MaxX series, the HiMaxX, in a market where the transalpine manufacturer is already well established. No discretion, both in the size of this box and in its ability to generate "noise". Yes, but a noise rather well reproduced and extended. Your turn to judge. This series will surely benefit from the well-known image of its big sister to make a place for itself. This new line includes five models including the HiMaxX 60 equipped with a 15 "woofer and a 1.4" motor that we present.

This Italian manufacturer of PA speakers has an experience of more than forty years ... it shows and especially it means. While maintaining the tradition that makes FBT a unique brand, this manufacturer is very attracted by the future. Surrounding itself with the best European suppliers, each component of the FBT loudspeakers is carefully chosen from a wide range of very high quality products. After the traditional wooden loudspeakers with the clear sound, the inevitable molded active speakers of the MaxX series, FBT has developed the UNIQUE Line Array system in a single speaker, proving once again its ability to combine development and audio aesthetics

The Mitus has two speakers so a 1600 Watt, 4 ohm, 138dB SPL. It features a passive LF and HF internal transducer circuit protection filter, and 2 x Speakon NL with 4MDV.

The FBT Mitus 152 two-way passive reinforcement speaker system must include 1 x 15 "B & C neodymium woofer with 3" voice coil and 2 "B & C neodymium output with 2.5" voice coil coupled to a rotary horn 60 ° x 40 °; thanks to the rotating HF horn, it is possible to create horizontal tables of 2 speakers for a total coverage of 100 °.

New flagship model of the famous series of amplified speakers MaxX FBT, the HiMaxX 40a is the most advanced molded and amplified acoustic loudspeaker and claims to race very largely ahead of the competition. Small in size, the HiMaxX 40a is a concentrate of power with the appropriate technical level to exploit it. The results are there, both in quality and in sound and dynamics.

900W RMS amplified professional speaker, DSP digital signal processing, highly efficient Class D amplifier, a very low weight of only 14.8kg, a choice of 6 EQ presets, the renewed FBT sound.

Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

The FBT SUBLINE 118S is an extremely compact bass-reflex design subwoofer with high SPL and punch. The FBT SUBLINE 118S feature 0,70" birch plywood construction covered in a scratch resistant black paint with two aluminum carrying handles; an M20 top mounted stand adapter allows satellite speakers, such as the FBT speaker series and others, to placed above the subwoofer cab. The FBT SUBLINE 118S features a 18" high excursion magnet woofer with 3" voice coil. The FBT SUBLINE 118S is able to produce a max SPL of 136dB and handles 1200W RMS. The control panel features 2 x Neutrik Speakon NL4MD-V connectors. External digital processor required: FBT DLM26 Digital Loudspeaker Management.

FBT has designed the SUBline range to complement all the brand's speakers. The SUBline 118Sa is a bass-reflex box with a 46cm (18 ") HP and amplified in 1200 watts RMS equipped with 2 XLR inputs (right and left) and 2 outputs with a switch to choose the use in "Hi" to go to a satellite speaker or "LINK" to go to other subwoofers. You can use the SUBline 118SA subwoofer to make a set of 2.1 or 2.2

The FBT VENTIS 115MAbi-amplified speaker feature 0,59" birch plywood costruction covered in a scratch & scuff resistant black finish. The FBT VENTIS 115MAis a two way design incorporating a 15" coaxial custom woofer with 2,5" voice coil and 1" exit throat B&C with 1,7" voice coil. With a frequency range of 50Hz - 20kHz provides hi fedelity sound for both speech and music applications with a maximum SPL of 132dB. The biamplified FBT VENTIS 115MA features 700W RMS low frequency amp and 200W RMS high frequency amp. DSP on board is both user friendly and powerful; a total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own design, using 5 parametric equalizers per slot. Control panel features balanced XLR/Jack input, XLR link out, 2 x volume, RCAstereo input, DSP display with rotative encoder and push, The optional mounting bracket allow the FBTVENTIS 115MAspeaker to be surface mounted on wall or ceilings. Thanks to the integrated steel pole mount, the FBTVENTIS 115MAcan be turned into a standard speaker in vertical configuration with a few simple moves.

The Rode VideoMic Pro R's integrated Rycote Lyre shockmount system isolates the microphone's capsule and electronics from its mount, giving you immunity to vibrations that may result in muddy-sounding audio. Whether you're hand-holding, or your camera is tripod- or steadicam-mounted, vibrations can find their way to your mic and ruin an otherwise good shot. The Rycote shockmount stops those vibrations completely. Constructed from a single piece of rugged thermoplastic, the Lyre provides better acoustic suspension than traditional elastic shock mounts - plus, it will never sag, break, or wear out.

The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. 

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera.

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.

The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.

Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.

A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.