DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.

Area of ​​application of the B&C Speakers 12FW64: Use in Bass/Midrange, the B&C 12FW64 can be used in all 2-way speaker projects with a 1" motor like the DE160 and a low pass cutoff around 2KHz in 12db/ oct.

Area of ​​application of the B&C Speakers 12FW76: Use in Low/Mid, the B&C 12FW76 can be used in a high-power satellite with a large 1.4 or 2" motor but its characteristics allow it to offer a low Medium and Kick standard An Aluminum demodulation ring channels the magnetic flux of the magnet and greatly reduces distortion.

The FW88 series is perfectly balanced for today's speaker systems. A performance-oriented range of ferrite woofers with a 3.5" (88mm) voice coil and high-flux ferrite magnet, incorporated into a compact yet powerful motor package. The results are unexpected low-frequency output and midrange expansion to meet almost any two-way speaker applications. Do more, with less, with the FW88 series.

The B&C Speakers 15FW76 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

The B&C Speakers 15FW88 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

The B&C Speakers 15FW76 loudspeaker, with its rugged design and impressive sound quality, embodies excellence in professional audio. Featuring a diameter of 15 inches and an impedance of 8 ohms, it is ideally suited for a wide range of applications, from high-fidelity sound systems to studio monitoring speakers.

Many integrators and speaker manufacturers around the world today use either B&C Speakers speakers or motors. Since 1945, this Italian manufacturer has been a key player in the HP market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capacities and technical constraints in order to obtain the optimal result, have flawless quality control. Today B&C Speakers offers more than a quality product, a sure value. From its complete range of motors from 1" to 2" equipped with neodymium magnets, to the numerous models of 5cm 54cm loudspeakers, each speaker like the 18TBW100 is tested in extreme conditions of use. Reliability and high quality, this is the philosophy adopted by B&C Speakers

Many integrators and speaker manufacturers around the world today use either B&C Speakers speakers or motors. Since 1945, this Italian manufacturer has been a key player in the HP market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capacities and technical constraints in order to obtain the optimal result, have flawless quality control. Today B&C Speakers offers more than a quality product, a sure value. From its complete range of motors from 1" to 2" equipped with neodymium magnets, to the numerous models of 5cm 54cm loudspeakers, each speaker like the 18TBW100 is tested in extreme conditions of use. Reliability and high quality, this is the philosophy adopted by B&C Speakers

The B&C DE10 is a small 1-inch motor that can be used from 2.5 kHz, it turns out to be an ideal component for building a small 2-way speaker with a small 16 or 20 cm bass/midrange. DE10 compression can also be used as a treble unit in a 3-way combination with bass and midrange. The ME10 horn is the ideal complement to the DE10 engine.

Latest generation of 1" motors equipped with HT Polymer diaphragms which provide a natural sound without aggressiveness. Beautiful linearity across the entire bandwidth.

With their extended frequency response and ability to process complex audio signals, B&C DE 10-8 Ohm loudspeakers are a preferred choice of audio engineers and audio professionals seeking to achieve superior sound quality and reliable performance in all usage situations.

With their extended frequency response and ability to process complex audio signals, B&C DE 10-8 Ohm loudspeakers are a preferred choice of audio engineers and audio professionals seeking to achieve superior sound quality and reliable performance in all usage situations.

B&C Speakers replacement parts are designed to ensure the durability and optimal performance of your audio equipment. Each component, whether diaphragms, cones or other parts, is manufactured with high quality materials and according to rigorous standards to ensure perfect compatibility and faithful sound reproduction. Their installation is generally simple and does not require complex techniques like soldering, making it easy to repair and keep your speakers in excellent condition. With B&C Speakers replacement parts, you can extend the life of your equipment while preserving its acoustic performance.

B&C Speakers replacement parts are designed to ensure the durability and optimal performance of your audio equipment. Each component, whether diaphragms, cones or other parts, is manufactured with high quality materials and according to rigorous standards to ensure perfect compatibility and faithful sound reproduction. Their installation is generally simple and does not require complex techniques like soldering, making it easy to repair and keep your speakers in excellent condition. With B&C Speakers replacement parts, you can extend the life of your equipment while preserving its acoustic performance.

- 2400 W continuous power

- 100 mm copper voice coil

- 35 Hz–1 kHz response

- 96 dB sensitivity

- Double‑silicone spider

- 700 W program power

- 76 mm aluminium voice coil

- High 99 dB sensitivity

- Lightweight neodymium magnet

- Efficient heat dissipation

- 160 W continuous power

- Titanium diaphragm clarity

- 1 k–18 kHz wide range

- 108 dB high sensitivity

- 65 mm aluminum voice coil

- 2400 W program power

- 100 mm copper voice coil

- 35 Hz–1 kHz bandwidth

- 97 dB sensitivity

- TWP waterproof cone

- 3 400 W continuous power

- 116 mm aluminum voice coil

- 30 Hz–1 kHz frequency range

- 99 dB high sensitivity

- Optimized excursion (Xvar)

- 1000 W continuous program

- 76 mm copper voice‑coil

- High sensitivity 99.5 dB

- Lightweight neodymium magnet

- Wide 40–2000 Hz response

- 1400 W program power

- 100 mm copper voice‑coil

- Sensitivity 96.5 dB

- Double silicone spider

- Broad 40–2000 Hz response

- 1400 W program power

- 100 mm copper voice coil

- Sensitivity 95.5 dB

- 30–1000 Hz frequency range

- Double silicone spider