* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.

* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.

* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.

* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.

* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection) allow users to be assured use.

- 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

- 6 Channel Partition output, and partition volume independent control.

- Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

- Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.

- When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.

- Built in 24V DC power input.

- Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* Mic1- 4 built-in 48V phantom power supply, and switch can be independently

controlled.

Industrial modeling aluminium panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable and washable cooling vents.

Soft-start power on, to prevent absorbing a large current from the power grid and disturbing other electrical equipments.

Intelligent control forced cooling design, low fan noise, high cooling efficiency etc.

Built-in intelligent limiter system, control the power module and the speaker system work in a safe range.

Built-in 30Hz / 50Hz high-pass filter.

Multiple modes: stereo, bridge, parallel.

Abundant reserve power, with 2R low-impedance output, high-fidelity and perfect sound quality.

High quality transformer, low resistance and large capacity electrolytic filter, ensure large dynamic work smoothly.

Class-H efficient power amplifier, comprehensive and reliable security protection measures and working status indicator (short circuit, overload, DC and overheat protection, transformer overheat protection), let users at easy use;

Industrial modeling steel panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable cleaning cooling vents.

Power on soft-start, to prevent absorbing a large current of the power grid, from interference with other electrical equipment.

Intelligent control forced cooling design, low fan noise, high cooling efficiency etc.

Built-in intelligent limiter system, control the power module and the speaker system work in a safe range.

Built-in 30Hz / 50Hz high-pass filter.

Multiple modes: stereo, bridge, parallel.

power output: 480W

One microphone signal input, line signal input and AUX, two remote microphone inputs.

Separated treble, bass and volume control. Master Volume Control.

Selectable recording signal, internal signal input and external signal selection.

When the START and GND short circuit is short, the emergency information will be broadcasted all the time, it will only stop when the user stops it manually. PULSE and GND trigger the short circuit once, the emergency information plays five times and then stops.

With the 24V input function, the rechargeable battery is 45-60 A / h, the charging current is 2-5 A.

With the 5-zone line detection function, press the corresponding button to perform real-time detection. It can define the test frequency: test every 10 minutes, 12 hours or 24 hours. If there's a foul line when there's a buzzer.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

Support digital audio transmission technology, simultaneous interpretation channel number 31 + 1, speech separation technology.

Great expansion features: 4096 system microphone capacity, hand-to-hand connection, hot swapping support.

Fully 4-channel meeting unit output interface with output circuit indicator. When the circuit is normal The LEDs flash, the LEDs go out when the circuit is disconnected.

Four microphone management modes: FIFO / NORMAL / VOICE (acoustic) / APPLY.

Speech microphone quantity and time selector: 1, 2, 4 and 8 president units are free to control.

- In 1U design, using real-time power monitoring amplifier technique, high performance amplifier circuit design, sound quality 

  of HIFI to restore the quality of audio sources perfectly.

- Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current;

- With intelligent clipping distortion and overcurrent pressure limit system;

- With the 30 / 50Hz high-pass filter;

- With the automatic fan cooling system for temperature control;

- Multiple modes: stereo, bridged and parallelism.

- In 1U design, using real-time power monitoring amplifier technique, high performance amplifier circuit design, sound quality   of HIFI to restore the quality of audio sources perfectly.

- Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current;

- With intelligent clipping distortion and overcurrent pressure limit system;

- With the 30 / 50Hz high-pass filter;

- With the automatic fan cooling system for temperature control;

- Multiple modes: stereo, bridged and parallelism.

Industrial modeling steel panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable cleaning cooling vents. 

Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current.

with intelligent forced cooling design, low fan noise and high electrical efficiency

* To adopt tech. of phase-locked loop (PLL) and CPU bus control management system.

* Support to select frequency both manually and automatically to confirm channel; To control squelch by noise lock and tone code lock; Through these method to achieve stable signal.

* With function of latest filter and anti-interference tech. to diaphragming external bad signal and mobile phone signal.

* Operating frequency is from 640Hz to 857MHz; Each receiver has 200 adjustable frequency band; Support 4 receivers to work simultaneously without interference.

Audio adapter, 3.5mm Stereo male Jack to 2x Female RCA , Plastic

* With 1U streamlined cabinet design, class-TR real time tracking power amplifier technology, high efficient amplifying circuit design, and high-fidelity sound quality, perfect to restore

the audio quality.

* Power on soft-start,to prevent absorbing a large current of the grid power ,from interference with other electrical equipment.

* Built-in smart clipping distortion and over-current limit system.

* Built-in 30Hz / 50Hz high-pass filter.

* Built-in automatic temperature control fan cooling system.

* Multiple modes: stereo, bridge, parallel.

* Comprehensive and reliable security protection measures and working status indicator, over-temperature, over-voltage, under-voltage, and over-current, short circuit multiple intelligent

detection and protection system.

Audio adapter, 6.35mm Stereo male Jack to Jack 3.5mm stereo female, Plastic

The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

Aywa - Y050, Mini stereo male jack / 2 male RCA 3m

The KA 2403 is a power amplifier designed for improved quality, stability and reliability. All equipped with Stereo-parallel-bridge operation mode, dB sensitivity switch ( 26-29-32dB ), limiter, ground lift, XLR/Jack inputs ( plus extra RCA input on KA 802 ), speakon/binding posts outputs.

The Kempton KA Series Power Amplifiers are designed and engineered by FBT, Italy. The Kempton KA 3002 features Class H, 2 step circuitry in a 2 rack space design, 18.1" deep. The KA 3002 is both fan cooled and passively cooled with all output components directly mounted to the heat sinks to provide optimum cooling and prevent thermal shutdowns.  

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.