FBT has designed the SUBline range to complement all the brand's speakers. The SUBline 118Sa is a bass-reflex box with a 46cm (18 ") HP and amplified in 1200 watts RMS equipped with 2 XLR inputs (right and left) and 2 outputs with a switch to choose the use in "Hi" to go to a satellite speaker or "LINK" to go to other subwoofers. You can use the SUBline 118SA subwoofer to make a set of 2.1 or 2.2

The FBT VENTIS 115MAbi-amplified speaker feature 0,59" birch plywood costruction covered in a scratch & scuff resistant black finish. The FBT VENTIS 115MAis a two way design incorporating a 15" coaxial custom woofer with 2,5" voice coil and 1" exit throat B&C with 1,7" voice coil. With a frequency range of 50Hz - 20kHz provides hi fedelity sound for both speech and music applications with a maximum SPL of 132dB. The biamplified FBT VENTIS 115MA features 700W RMS low frequency amp and 200W RMS high frequency amp. DSP on board is both user friendly and powerful; a total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own design, using 5 parametric equalizers per slot. Control panel features balanced XLR/Jack input, XLR link out, 2 x volume, RCAstereo input, DSP display with rotative encoder and push, The optional mounting bracket allow the FBTVENTIS 115MAspeaker to be surface mounted on wall or ceilings. Thanks to the integrated steel pole mount, the FBTVENTIS 115MAcan be turned into a standard speaker in vertical configuration with a few simple moves.

Aywa - A019, Jack/Jack Cable 1m

Aywa - Y016, Jack Cable / Metal Bent Jack 6m 0

Aywa - Y014, Jack/Jack Cable 3m

The Rode VideoMic Pro R's integrated Rycote Lyre shockmount system isolates the microphone's capsule and electronics from its mount, giving you immunity to vibrations that may result in muddy-sounding audio. Whether you're hand-holding, or your camera is tripod- or steadicam-mounted, vibrations can find their way to your mic and ruin an otherwise good shot. The Rycote shockmount stops those vibrations completely. Constructed from a single piece of rugged thermoplastic, the Lyre provides better acoustic suspension than traditional elastic shock mounts - plus, it will never sag, break, or wear out.

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. 

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

Short Microphone Stand, telescopic. 

Universal microphone clamp, Black

Jack mono male / XLR female 10m

Y010, Jack / Jack Cable 3m

Male Mono Jack / Male Mono Jack 30 cm - White

Male Mono Jack / Male Mono Jack 30 cm - Orange

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit 0

Audio adapter from 1/4″ stereo female Jack to 1/4″ stereo  female Jack

stereo male Jack / stereo male Jack, 6m

Yellow Cable - ECO K09-3, 2 Male RCA / 2 Male XLR, 3m

Aywa - Y059, stereo jack male / XLR male 1m

Metal - 6m Jack/Jack spring Cable

Male XLR / female XLR, 3m cable

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.

The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.