The dual-core DSP topology employs 24-bit linear AD/DA converters and the processing is in 48-bit double-precision resolution. At >116 dB, the dynamic range of the DSP 600 is at the upper extreme of what is technically feasible – fTHD is less than 0.002%. With IIR filters and high-resolution 512-tap FIR filters, precise loudspeaker protection and a multi-stage delay concept, the DSP 600 sets new standards in the field of digital loudspeaker management. FIR-TUNE permits the use of DYNACORD speaker settings with integrated crossover and FIR filter settings for the greatest possible linearization of the magnitude and phase of the transfer function. Over IRIS-Net, any desired number of DSP 600 processors, together with other IRIS-Net capable devices, can be configured and operated swiftly and conveniently.

Volume control is designed with separate toroidal transformer. It is the volume control in 5 steps. It is made with the plastic wall plate.

ITC - T-112F, Volume Control Designed with 120W Separate Toroidal Transformer

Volume control is designed with transformer. It is volume control 5 steps. It is made of ABS materials.

Volume control is designed with transformer. It is volume control 5 steps. It is made of ABS materials.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

The T-106 is a built-in integrated ceiling transformer 70v / 100v. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers.

The built-in 6 "+ 1.5" coaxial speaker driver is designed for a wide frequency response of 110 to 16 kHz, the multiple 3W, 6W and 9W power outlets are useful for different applications, depending on the size of the speaker. the room and ambient noise environments. Aluminum grille and metal The baffle is painted in an attractive white color. Its spring clip provides easy and secure installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

ITC - T-205A, Passive Coaxial Ceiling Loudspeaker, 10W 5 "

The T-206BC is an integrated integrated 70v / 100v ceiling transformer. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers.

The 6 "built-in dual-cone paper speaker driver is designed for a wide 80-20kHz frequency response, the multiple 1.25W, 2.5W, 5W and 10W power outlets are useful for different applications, depending on size. of the room and ambient noise environments. The metal grille and ABS baffle are painted in attractive white color. Its type of flush mounting facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The T-104GK is a 70v / 100v ceiling integrated transformer.

The 70v / 100v transformer technique reduces line losses at longer distances and allows easy parallel connection of

several speakers.

The 4 "built-in waterproof speaker driver is designed for wide frequency response at 90-20kHz, multiple 3W and 6W power outlets are useful for different applications, depending on room size and ambient noise environments . The metal grille, ABS baffle and metal back cover are attractive white RAL9016 paints. Its spring clip facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The Zoom H1n's dead-simple stereo pickup with unlimited overdubs makes archiving music performances, dialogue, and sound for film easier than ever. The H1n is the successor to the acclaimed H1. Upgraded features include dedicated one-touch buttons for recording, playback, and audio settings; a new 1.25" backlit LCD that reads easily in any lighting condition; slate and test tone generators for simpler A/V sync; auto-record and self-timer functions; a front-facing speaker; and adjustable playback speed for transcription and notation. Whether you use the phase-coherent onboard stereo XY mics or plug in your own sound source via the 1/8" stereo mic/line jack, the Zoom H1n captures your world in glorious 24/96 hi-fi. Note: requires an SD card for recording

The USB mixer amplifiers have power ratings from 60W, 120W to 240W. They are featured of three microphone inputs, two aux inputs and one EMC input. Priority muting is achieved via EMC input for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

The ITC TS-9000S is an open programming control platform with the latest 32-bit integrated preloader and up to 210 MHz processing speed, 8 inputs and outputs, 8 relay ports, volume control and one 232, RS485, RS422. Supports 3 TS-NET control buses.

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

T-2221 is a dual-source music player, built in AM / FM tuner. CD player, MP3, tuner and integrated remote control. USB and SD inputs on the front panel for MP3 player and an AM / FM tuner each with 99 bands.Two florescent screens for display in English CD / MP3 and a separate tuner.

Mixer with 6 speaker selector of source selection area and zone control. Built-in microphone and recorder for recording and storing voice messages easy. High-chime, including remote trigger and volume is provided. Volume control is provided for the microphone, music, mater, record and broadcast messages, lower and treble tone control. Indications include zone selector, source selector, recording status, power, and output level meters. 4 priority levels from top to bottom: remote paging console, Mic1, chime, pre-recorded message broadcast.

2 channel mixer with 10 inputs and every 10 inputs with mic, line and high pass filter selector. Built-in 2/4 pre-series chime, remote chime trigger and local trigger on the front panel. The volume controls are provided above chime, MIC1, inputs 2-10, channel 1 and channel 2 masters. Bass and treble tone control are provided for both channels 1 and 2.

T-2129 is CD player with SD / USB inputs that support CD / MP3 discs. remote control to change input models whether SD or USB. Automatic read SD card when no disk input or USB is used. Stereo left channel and right channel output.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

Wide voltage input. No-load power: <0.5W. Single output, short circuit protection. Efficient and reliable. According to the different regions, self-optional AC power cables. Suitable models: TS-0221, TS-0670HY

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The T-774HWP is an integrated 70 wall bracket / 100V loudspeaker transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows an easy parallel connection of several loudspeakers. The 4" 1.5" 2-way speaker driver is designed from 80 Hz wide frequency response to 20 kHz, the power of the multiple plugs 2.5, 5, 10 and 20W are useful for different applications varies from the size of the room and an ambient noise environment. The metal grille, ABS housing and stainless steel mounting bracket are white in color. Easy and secure wall bracket installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in hotels, schools, offices and factories where background music and pagination are required.

Digital Mixer Amplifier with MP3/TUNER/Bluetooth, used for background music playback of small and medium-sized indoor venues such as small and medium-sized supermarkets, shopping malls, and leisure cafes.

Standard rack mounted design (1U), SMT technology.

Support mp3/TUNER/Bluetooth remote control function, and the remote control distance is up to 8 m.

With USB interface and SD card interface, integrated MP3 player module, with automatic priority playing audio function, and digital screen can display the currently playing music of USB.

Integrated Bluetooth module to support to play music via Bluetooth mobile phone.

Ti-240TB is a mixer amplifier with MP3 / TUNER / Bluetooth Designed for background music broadcasting in small supermarkets, shopping malls, leisure cafes and other small indoor rooms.