The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

The FBT SUBLINE 118S is an extremely compact bass-reflex design subwoofer with high SPL and punch. The FBT SUBLINE 118S feature 0,70" birch plywood construction covered in a scratch resistant black paint with two aluminum carrying handles; an M20 top mounted stand adapter allows satellite speakers, such as the FBT speaker series and others, to placed above the subwoofer cab. The FBT SUBLINE 118S features a 18" high excursion magnet woofer with 3" voice coil. The FBT SUBLINE 118S is able to produce a max SPL of 136dB and handles 1200W RMS. The control panel features 2 x Neutrik Speakon NL4MD-V connectors. External digital processor required: FBT DLM26 Digital Loudspeaker Management.

FBT has designed the SUBline range to complement all the brand's speakers. The SUBline 118Sa is a bass-reflex box with a 46cm (18 ") HP and amplified in 1200 watts RMS equipped with 2 XLR inputs (right and left) and 2 outputs with a switch to choose the use in "Hi" to go to a satellite speaker or "LINK" to go to other subwoofers. You can use the SUBline 118SA subwoofer to make a set of 2.1 or 2.2

The FBT VENTIS 115MAbi-amplified speaker feature 0,59" birch plywood costruction covered in a scratch & scuff resistant black finish. The FBT VENTIS 115MAis a two way design incorporating a 15" coaxial custom woofer with 2,5" voice coil and 1" exit throat B&C with 1,7" voice coil. With a frequency range of 50Hz - 20kHz provides hi fedelity sound for both speech and music applications with a maximum SPL of 132dB. The biamplified FBT VENTIS 115MA features 700W RMS low frequency amp and 200W RMS high frequency amp. DSP on board is both user friendly and powerful; a total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own design, using 5 parametric equalizers per slot. Control panel features balanced XLR/Jack input, XLR link out, 2 x volume, RCAstereo input, DSP display with rotative encoder and push, The optional mounting bracket allow the FBTVENTIS 115MAspeaker to be surface mounted on wall or ceilings. Thanks to the integrated steel pole mount, the FBTVENTIS 115MAcan be turned into a standard speaker in vertical configuration with a few simple moves.

The D 8 is a light‑weight, robust 8"/1", 2‑way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.

 The dual-core DSP topology employs 24-bit linear AD/DA converters and the processing is in 48-bit double-precision resolution. At >116 dB, the dynamic range of the DSP 600 is at the upper extreme of what is technically feasible – fTHD is less than 0.002%. With IIR filters and high-resolution 512-tap FIR filters, precise loudspeaker protection and a multi-stage delay concept, the DSP 600 sets new standards in the field of digital loudspeaker management. FIR-TUNE permits the use of DYNACORD speaker settings with integrated crossover and FIR filter settings for the greatest possible linearization of the magnitude and phase of the transfer function. Over IRIS-Net, any desired number of DSP 600 processors, together with other IRIS-Net capable devices, can be configured and operated swiftly and conveniently.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

Wall element for fixing Dynacord C15.2, Black

Wall element for fixing Dynacord C12.2, Black

Protective cover for Dynacord VL212

Protective cover for Dynacord VL152

Protective cover for Dynacord VL122

The Dynacord SH-A115 PA Speaker Dustcover is specifically designed to house and protect the Dynacord A115 and A115A PA speakers.

Protective bag for Dynacord TS 200W

Protective bag for Dynacord A112/ A112 A

The Electro-Voice ND6-8 is a world-class high-frequency compression driver capable of extremely high acoustic output over a wide frequency range.

The TX1181 uses the EVS-18S, a high excursion 18” woofer, coupled to well braced enclosure with large, low distortion ports, to add high impact bass response to any fullrange loudspeaker. An integrated low pass filter allows the TX1181 to be connected in parallel with a TX1122 or TX1152 on a single amplifier channel, eliminating the need for additional amplifier channels and processing.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

Electro-Voice or Dynacord ND2-8R Compression Driver.

Spare part speaker, 400W RMS / 8Ohms, 18"

The FBT MITUS 218S, 2 x 18" large vented bass-reflex subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBTMITUS 206 Line array for ground stack applications with optional MTB206 metal base.

Professional amplified speaker 900W RMS, digital signal processing DSP, amplifier class D high efficiency, very low weight of only 17.4 kg, a choice of 6 preset equalizer, sound renewed FBT.

The new speaker series PROMAXX combines true quality and style made in Italy

Delivering optimal audience coverage with the ability to adapt to the requirements of the project at hand, HORIZON VHA represents a step forward in flexible sound reinforcement technology with exceptional sound quality. Crafted in Italy with the no-compromises manufacturing excellence for which FBT is known, the HORIZON VHA series comprises the full range VHA406A, plus two options for low-end extension in the shape of the 12” VHA112SA and 18” VHA118SA.

The FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. 

With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. 

The FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. 

With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. 

FBT MITUS 152A, large-scale loudspeaker, equipped with a 15" Nodym from B&C Speakers and a large 2" motor also from B&C Speakers. 

The 2" motor allows great sound projection and a sensitivity of 136db SPL Max. A wooden body with a resistant paint structure, a DSP with 8 equalization programs to configure the speaker's settings to your use 

FBT launches the next stage of the PA PROMAXX portable speaker range. With a specially designed polypropylene cabinet and sleek solid grille aesthetic, FBT's new PROMAXX represents the next step in the evolution of classic portable audio. Equipped with custom FBT drivers, featuring B&C's cutting-edge compression technology, PROMAXX combines quality and style made in Italy.

FBT - ProMaxX 110, Passive speaker 300W RMS / 8OHMS, 10"/1"

Passive PA speaker for line array system, 2 x 6 inches, 500+ 150 W RMS, 2 x 16 ohms Perfectly suited to small and medium-sized indoor performances, the MITUS 206L can also be used in outdoor performances where the system is not is not directly exposed to the elements.