Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Garanties sécurité (à modifier dans le module "Réassurance")
Politique de livraison (à modifier dans le module "Réassurance")
Politique retours (à modifier dans le module "Réassurance")
Dynacord - SL900, Power Amp 2 x 450 watts RMS / 4 ohms
Informations
Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Characteristics
- 2x 450W/4 Ohm
- 2x 270W/8 Ohm
- 2x 650W/2 Ohm
- 1x 900W/8 Ohm bridge
- Suitable for 2 Ohm
- Balanced XLR in/out
- Speaker Twist out
Specifications
- Ground lift
- Limiter
- LPN Filter (Low-Pass-Notch) protections
- Temperature protection
- DC protection
- Fan
- Weight: 12.6 kg
- Dimensions: 483 x 88.1 x 421.5 mm
Download
SL900
Download (484.04k)No customer reviews for the moment.
Related Products
Dynacord - SL 2400, Power Amp 2 x 1200 Watts RMS / 4 ohms
Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Dynacord - SL1200, Power Amp 2 x 600 watts RMS / 4 ohms
Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
- -7.5%
Teli - BT-MP326C, Bluetooth Stereo Amplifier
STEREO dual channel amplifier STEREO TELI karaoke amplifier BT-MP326C
ITC - TS-2060W, Multimedia Power Amplifier 2 X 60W
* Two line audio inputs with function of switch.
* Three line MIC inputs, with function of independent gain adjustment.
* Professional digital echo delay, which makes sound more nature.
* With SD/USB interface MP3 player, Bluetooth function, Digital Nixie tube display function .
* With MP3 recording function, which can recording your sing and talking, and play it by MP3 player.
ITC - TS-200PI, Power Amp 2 x 200W
* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.
* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.
* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.
* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.
* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection), allow users to be assured use.
ITC - TS-350PI, Power Amp, 2 x 350W
* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.
* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.
* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.
* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.
* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection), allow users to be assured use.
- -12.29%
ITC - TS-500PI, Power Amp 2 x 500W
* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.
* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.
* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.
* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.
* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection),
- -9.54%
ITC - TS-700PI, Power Amp 2 x 700W
* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.
* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.
* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.
* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.
* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection) allow users to be assured use.
- -9.69%
Related Products By Brand
Dynacord - VL212 VariLine, 2-Way Passive Speaker, 800W RMS/ 4 Ohm, 12"/1.4"
The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.
- -3.59%
Dynacord - PowerSub 312, Amplified Subwoofer 800W RMS/ 4 Ohm, 12"
The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.
Dynacord - VL152 VariLine, 2-Way Passive Subwoofer 500W RMS/ 8 Ohm, 15"/1,4"
The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.
- -3.33%
Dynacord - VL122 VariLine, Passive Speaker, 400W RMS/ 8 Ohm, 12"/1,4"
The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.
- -3.89%
Dynacord - Sub 18, Passive Subwoofer 700W RMS/ 8 Ohm, 18"
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.
- -5.87%
Dynacord - TS-200, 2-Way Passive Speaker 300W RMS/ 8Ohm, 2X6.5"/1"
TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.
- -5.12%
Dynacord - D12W D-LITE Series ,2-Way Passive Speaker, 350W RMS/8 Ohms, 12"/ 1.4"
Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.
Dynacord - D12 R, 2-Way Passive Speaker 300W RMS/8 Ohms, 12"/ "1"
The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.
- -10%
Dynacord - D12 RW, 2-Way Passive Speaker, 300W RMS/8 Ohms, 12"/ 1"
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
- -4.55%