List of products by brand Dynacord

Amplifier module for Dynacord A115A loudspeakers

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

 The dual-core DSP topology employs 24-bit linear AD/DA converters and the processing is in 48-bit double-precision resolution. At >116 dB, the dynamic range of the DSP 600 is at the upper extreme of what is technically feasible – fTHD is less than 0.002%. With IIR filters and high-resolution 512-tap FIR filters, precise loudspeaker protection and a multi-stage delay concept, the DSP 600 sets new standards in the field of digital loudspeaker management. FIR-TUNE permits the use of DYNACORD speaker settings with integrated crossover and FIR filter settings for the greatest possible linearization of the magnitude and phase of the transfer function. Over IRIS-Net, any desired number of DSP 600 processors, together with other IRIS-Net capable devices, can be configured and operated swiftly and conveniently.

Dynacord's Paramus is a series of installation of power amplifiers that have been designed for the scope of reinforcement of its concert, background music, messaging, and for alert and evacuation systems in the event of fire. The series consists of 5 universal and reliable models with a capacity of 160 to 450 watts.

The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.

The PowerMate 1000-3 is a rugged analog amplified console with professional performance for all live applications. The clear layout and direct access to all functions makes it an easy to use tool. By integrating a graphical equalizer on the master outputs, a digital multi-effect and a stereo USB Audio interface (MAC/PC), a three-track per-channel equalisation with low cut, voice pre-emphasis and semi-parametric tuning on the microphone slices and also an anti-feedback Notch filter on each scene return, the PowerMate 1000-3 offers all the tools you need to sculpt sound and perfect your mixes when you're looking for a high quality sound quality. The PowerMate 1000-3 is equipped with a powerful 2 X 1000RMS two-channel amplifier in 4 Ohms Class D with DSP processing for stereo output or reassignable to external input mode. Finally, the PowerMate 1000-3 can be mounted in a 19 "rack or an optional transport protection cover.

The PowerMate compact power mixers incorporate profound know‑how, based on our research, development and inter‑communication with our customers in the professional audio market, for decades.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand‑alone device. The PowerMate is a real all‑rounder for almost all applications with maximum feature set at minimum size.

The PM2200‑3 is the largest member of the PowerMate family. It is by far the most powerful and best equipped compact powered mixer on the market.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand‑alone device. The PowerMate is a real all‑rounder for almost all applications with maximum feature set at minimum size.

The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.

The Compact Mixing System from DYNACORD has seized pole position in this segment of the market by virtue of the quality of its sound, components and features. By integrating a high-quality mixer, two digital effects processors of studio grade, a graphic equalizer and also a professional digital interface to PC or Mac, the CMS mixers represent the ideal solution for a large number of demanding applications in the audio sector.

The Compact Mixing System from DYNACORD has seized pole position in this segment of the market by virtue of the quality of its sound, components and features. By integrating a high-quality mixer, two digital effects processors of studio grade, a graphic equalizer and also a professional digital interface to PC or Mac, the CMS mixers represent the ideal solution for a large number of demanding applications in the audio sector.

The Compact Mixing System from DYNACORD has seized pole position in this segment of the market by virtue of the quality of its sound, components and features. By integrating a high-quality mixer, two digital effects processors of studio grade, a graphic equalizer and also a professional digital interface to PC or Mac, the CMS mixers represent the ideal solution for a large number of demanding applications in the audio sector.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

Equipped exclusively with high‑quality components, A‑Line loudspeakers stand apart in their class thanks to their high power‑handling capacities and 15mm‑thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

These speakers are ideal companions for small, midsize concerts, bringing the legendary quality of DYNACORD to the budget and offering features you would never expect in this range. Equipped exclusively with high-quality components, A-Line loudspeakers stand out in their class thanks to their high-powered capabilities and 15mm thick plywood cabinets that are like light because they are rugged.

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

The C 12.2 is a compact, 12 "trapezoidal / two-way full-range cabinet offering very high power handling (500W continuous 2000W peak) and sensitivity of 97 dB 1W / 1m.

Under 1.15 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Under 1.18 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Boasting a power handling of 1000W and 4000W continuous peak, Sub 2.18 can be used universally for two-way or three-way active systems.

18-inch active subwoofer with 400w class D power amp.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

PM502 comes in a very modern and user‑friendly design. It combines finest analogue input circuitry and operating surface with the advantages of its digital master and amplifier section, made for a new dimension of flexibility in its class.

The DP1-UC10E-1 is a powerful 10W sound projector for high-quality voice and music reproduction in indoor and outdoor applications. The advanced design is suitable for both modern and traditional style environments. The sound projector is suitable for use in voice alarm systems.

The DC1 range of modular ceiling loudspeakers can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction. It includes three 6W single cone speakers with a choice of opening angle and two high-performance coaxial speakers of 12 and 24W. 

19" rack mounting kit for the SMD 600-3 amplified mixer

19" Rack Mounting Kit For The PM 502 Amplified Mixer, black

Protective bag for Dynacord A112/ A112 A

Protective bag for Dynacord TS 200W

The Dynacord SH-A115 PA Speaker Dustcover is specifically designed to house and protect the Dynacord A115 and A115A PA speakers.

Protective cover for Dynacord VL122

19" Rack Mount Kit for Power Mate 1000-3

Carrying Case For PowerMate 2200-3 / CMS 2200-3

Protective cover for Dynacord VL152

Protective cover for Dynacord VL212

Wall element for fixing Dynacord C12.2, Black

Wall element for fixing Dynacord C15.2, Black

The 6003 Mixer Bag from Dynacord is a light-weight protective cover for the PowerMate 600-3. Made of high quality nylon, this cover will keep your speaker safe from dust and water.

Solid DYNACORD amplifier technology at highly competitive prices.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.

The D 8 is a light‑weight, robust 8"/1", 2‑way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

This lightweight speaker is perfect for entertainers, presenters, schools or multi-media applications, for instance. Its transparent sound is great for any type of music, but also for speech and vocals. The sound is highly defined and can hold its own under virtually all circumstances. This passive speaker is a great performer, whether at high or at low volumes. The D12 can be driven by an amplifier or a powered subwoofer, creating a compact sound system that can easily be transported in the boot of your car.

Two new members have been added to the D-Lite series first introduced by DYNACORD in 2005: the D8 two-way full-range speaker system and the SUB 112 twelve-inch subwoofer. These round off the series—which has proved successful all over the world—in a harmonious fashion.Both new models in the D-Lite series are the result of a well-considered process of optimization. Their most significant features—enormous sound pressure levels, low distortion, compact dimensions and subtle styling—make the D8 and SUB112 equally suitable for mobile and fixed professional sound reinforcement applications.

Solid DYNACORD amplifier technology at highly competitive prices.

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.

The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.

The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.

The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.

The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.

The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.

The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.