Volume control is designed with transformer. It is volume control 5 steps. It is made of ABS materials.

Volume control is designed with transformer. It is volume control 5 steps. It is made of ABS materials.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

It is very light and despite its extremly compact dimensions provides a very powerful and deep bass. The PowerSub 112 is the ideal bass extension for active fullrange-cabinets such as the D 8A.

The Class-D power amplifier module delivers 200 W RMS / 400 W max. Output and is equipped with an integrated crossover with a Mid-High output. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 121 dB

The vented design gives the PowerSub 112 a very musical, tight and voluminous sound, quite unlike that of band-pass solutions widely encountered in this product range.

The PowerSub 212 is an extremely compact and high power subwoofer with 2x 12 "Woofers and 2x 200 W RMS / 2x 400 W max output power amplifiers.

The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active full-frequency cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or the D 11A and convinces with a deep bass foundation. The frequency range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.

The MASK4T loudspeaker has a unique innovative design and its transparent sound offers incredible intelligibility ideal for background music and paging purposes. MASK4T can be used in low impedance 16 ohms (up to 4 loudspeakers in parallel on a standard 4 ohms amplifier channel) or in 100 volt with several power tappings (20 – 10 – 5 – 2.5 watts).

ITC - T-206A, Passive Coaxial Ceiling Loudspeaker, 20W 6 "

The volume control is designed with an integrated transformer. This is a 5-step volume control. It is made with a plastic wall plate.

The T-601 is a built-in wall speaker built into a 70v / 100v transformer. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers. The 6.5 "+ 2" built-in two-way speaker driver is designed for a wide frequency response of 130 to 16 kHz, the multiple 3W, 6W and 10W power outlets are useful for different applications, depending on the size of the speaker. the room and ambient noise environments. The ABS enclosure is white in color and the metal grille is gray in color. Easy and secure wall mount installation through mounting holes provided. It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The T-511A is a 9.7 diameter diameter condenser microphone that is heart shaped with a frequency of 80 to 12000 Hz.

900W RMS amplified professional speaker, DSP digital signal processing, highly efficient Class D amplifier, a very low weight of only 14.8kg, a choice of 6 EQ presets, the renewed FBT sound.

The T-106 is a built-in integrated ceiling transformer 70v / 100v. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers.

The built-in 6 "+ 1.5" coaxial speaker driver is designed for a wide frequency response of 110 to 16 kHz, the multiple 3W, 6W and 9W power outlets are useful for different applications, depending on the size of the speaker. the room and ambient noise environments. Aluminum grille and metal The baffle is painted in an attractive white color. Its spring clip provides easy and secure installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

ITC - T-205A, Passive Coaxial Ceiling Loudspeaker, 10W 5 "

The T-206BC is an integrated integrated 70v / 100v ceiling transformer. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers.

The 6 "built-in dual-cone paper speaker driver is designed for a wide 80-20kHz frequency response, the multiple 1.25W, 2.5W, 5W and 10W power outlets are useful for different applications, depending on size. of the room and ambient noise environments. The metal grille and ABS baffle are painted in attractive white color. Its type of flush mounting facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The T-104GK is a 70v / 100v ceiling integrated transformer.

The 70v / 100v transformer technique reduces line losses at longer distances and allows easy parallel connection of

several speakers.

The 4 "built-in waterproof speaker driver is designed for wide frequency response at 90-20kHz, multiple 3W and 6W power outlets are useful for different applications, depending on room size and ambient noise environments . The metal grille, ABS baffle and metal back cover are attractive white RAL9016 paints. Its spring clip facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 10 "fiber-impregnated speaker and a flexible 1.5" tweeter.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 15 "fiber-impregnated speaker and a flexible 1.75" tweeter.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 100 "fiber mpregnated speaker and a flexible 1.5" tweeter.

Perfect for environments or premium space, PP-1712C is a 2-way rear speaker with a 12 "fiber-impregnated speaker and a flexible 1.75" tweeter.

Perfect for environments or premium space, PP-1715 is a 2-way rear speaker with a 15 "fiber-impregnated speaker and a flexible 1.75" tweeter.

Simply brilliant dual HF microphones: small price, but great value! Large transmission gate, voice rendering, autonomy.

Transmitter Handheld Mic FM Lavalier Wireless Mini Microphone BK25H

Short Microphone Stand, telescopic. 

The HK Audio Installation Line was developed with one goal foremost in mind – to render the natural sound of the human voice with utmost authenticity. A true and accurate signal is important in speakers designed for fixed installation, and critical in emergency situations. Fortunately, HK Audio engineers have the ideal surrounding in which to tune new speaker systems – one of the industry’s most advanced acoustical measuring rooms, developed by the Fraunhofer Institut für Bauakkustik. Audio quality was a top priority in our efforts to develop the Installation Line, but the hardware received equal attention. Robust speaker grilles, rugged and reliable connector ports, numerous mounting options, and easy-to-use accessories were just some of the details our development team was tasked to perfect.

HK Audio - IL80CTW, While being modeled after a set of draconian burdens in terms of components, the IT series features a quality / price amazing. The development of this family of installation products was primarily focused on research of tonal coherence and particularly intelligibility of voice. Objective fully achieved. Finally, we have a comprehensive range can operate in low impedance or 100 volt line.

Despite its ultra-compact size, the MICROMIX MX400 4-channel line mixer is really big on features! Providing the highest sonic quality at all output levels vs. the competition, the MX400 features ultra low-noise 4580 operational amplifiers for outstanding audio performance – the same chips as the ones found in its much bigger mixers. Use the MX400 as a sub-mixer for your mixer: If you are running short on available channels on your “big” mixer and need to add 3 more keyboards to your mix, just connect them to the MX400, dial-in the mix – and connect MX400’s output to a single input on your main mixer. This way you have the opportunity to mix your keyboard with the MX400, without immediately occupying several valuable mixer channels.

Perfect for environments or premium space, PP-1712 is a 2-way rear speaker with a 12 "fiber-impregnated speaker and a versatile 1.34" tweeter.

High-quality Roland 13-pin cable for use with the GR-33 system and more.