This compact two-way speaker delivers fullrange audio signals in HD quality. It is perfect for covering short distances such as in foyers or bars. The IL 60 TB/TW”s polymer housing is trapezoidal to prevent the formation of standing waves as well as to facilitate corner mounting and inconspicuous installation many different kinds of rooms. This enclosure provides satisfying fullrange sound even without a subwoofer. It features a 6.5″ woofer and a 1” tweeter with neodymium magnets. The two are configured in twin axial array and addressed via an internal passive crossover. The switchable 100V transformer provides five power taps, selectable via rotary switch. Its nominal power handling capacity is 40 watts RMS.

* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.

*  Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.

*  Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.

* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.

* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection), allow users to be assured use.

While being modeled after a set of draconian burdens in terms of components, the IT series features a quality / price amazing. The development of this family of installation products was primarily focused on research of tonal coherence and particularly intelligibility of voice. Objective fully achieved. Finally, we have a comprehensive range can operate in low impedance or 100 volt line

* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.

* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.

* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.

* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.

* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection), allow users to be assured use.

* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.

* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.

* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.

* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.

* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection),

* Four channel amplifier in a 3U 19”rack mount design

* All source inputs could be matrix assigned to different 4 zones outputs simultaneously

* The 5 channel inputs & Mp3 input are designed with separate bass, treble and volume control

* Three microphone/line inputs with phantom power and gain control

* Two aux inputs by RAC with gain control

* Mp3 player with SD and USB inputs, separate power supplied module

* Built in Tuner audio source

Using the buttons; provide shortcuts for recording, playback, mode selector or to limit the volume.

4 types of conference modes: Fist-in-premier-out / Normal / Free / Apply.

With the limit function for the amount of active microphones: The optional limit amount is 1/2/4/6, and the president unit is unlimited.

1 host can be connected to up to 30 conference microphones;

The method of connecting conference microphones is "Hand-in-hand", which is easy to install and maintain;

* Industrial modeling steel panel, professional design with durable surface, the panel can be folded wash by the air filter design, removable cleaning cooling vents.

* Start soft start to prevent power to the grid absorb a large current, interference with other electrical equipment.

* Intelligent control forced cooling designs, low fan noise, and high thermal efficiency.

* Two-channel amplifier input sensitivity can select third gear, easy to accept wide input amplitude range of the signal source.

* Complete and reliable security protection measures and working status indicator (short circuit, overload, DC and overheating protection, transformer overheating protection) allow users to be assured use.

- 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

- 6 Channel Partition output, and partition volume independent control.

- Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

- Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.

- When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.

- Built in 24V DC power input.

- Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

The Yellowtec Mika Series is a stylish, integrated system for mounting and positioning microphones in studio and workstation applications, giving an elegant visual appearance for all the 'desktop furniture' in a studio.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* Mic1- 4 built-in 48V phantom power supply, and switch can be independently

controlled.

ECO M10J, Mono Jack Cable / Female XLR 10m

Industrial modeling aluminium panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable and washable cooling vents.

Soft-start power on, to prevent absorbing a large current from the power grid and disturbing other electrical equipments.

Intelligent control forced cooling design, low fan noise, high cooling efficiency etc.

Built-in intelligent limiter system, control the power module and the speaker system work in a safe range.

Built-in 30Hz / 50Hz high-pass filter.

Multiple modes: stereo, bridge, parallel.

Abundant reserve power, with 2R low-impedance output, high-fidelity and perfect sound quality.

High quality transformer, low resistance and large capacity electrolytic filter, ensure large dynamic work smoothly.

Class-H efficient power amplifier, comprehensive and reliable security protection measures and working status indicator (short circuit, overload, DC and overheat protection, transformer overheat protection), let users at easy use;

Industrial modeling steel panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable cleaning cooling vents.

Power on soft-start, to prevent absorbing a large current of the power grid, from interference with other electrical equipment.

Intelligent control forced cooling design, low fan noise, high cooling efficiency etc.

Built-in intelligent limiter system, control the power module and the speaker system work in a safe range.

Built-in 30Hz / 50Hz high-pass filter.

Multiple modes: stereo, bridge, parallel.

power output: 480W

One microphone signal input, line signal input and AUX, two remote microphone inputs.

Separated treble, bass and volume control. Master Volume Control.

Selectable recording signal, internal signal input and external signal selection.

When the START and GND short circuit is short, the emergency information will be broadcasted all the time, it will only stop when the user stops it manually. PULSE and GND trigger the short circuit once, the emergency information plays five times and then stops.

With the 24V input function, the rechargeable battery is 45-60 A / h, the charging current is 2-5 A.

With the 5-zone line detection function, press the corresponding button to perform real-time detection. It can define the test frequency: test every 10 minutes, 12 hours or 24 hours. If there's a foul line when there's a buzzer.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

Support digital audio transmission technology, simultaneous interpretation channel number 31 + 1, speech separation technology.

Great expansion features: 4096 system microphone capacity, hand-to-hand connection, hot swapping support.

Fully 4-channel meeting unit output interface with output circuit indicator. When the circuit is normal The LEDs flash, the LEDs go out when the circuit is disconnected.

Four microphone management modes: FIFO / NORMAL / VOICE (acoustic) / APPLY.

Speech microphone quantity and time selector: 1, 2, 4 and 8 president units are free to control.

- In 1U design, using real-time power monitoring amplifier technique, high performance amplifier circuit design, sound quality 

  of HIFI to restore the quality of audio sources perfectly.

- Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current;

- With intelligent clipping distortion and overcurrent pressure limit system;

- With the 30 / 50Hz high-pass filter;

- With the automatic fan cooling system for temperature control;

- Multiple modes: stereo, bridged and parallelism.

- In 1U design, using real-time power monitoring amplifier technique, high performance amplifier circuit design, sound quality   of HIFI to restore the quality of audio sources perfectly.

- Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current;

- With intelligent clipping distortion and overcurrent pressure limit system;

- With the 30 / 50Hz high-pass filter;

- With the automatic fan cooling system for temperature control;

- Multiple modes: stereo, bridged and parallelism.

Industrial modeling steel panel, professional design and durable surface, anti-dust mesh panel with folding structure design, removable cleaning cooling vents. 

Supports soft start to avoid causing interference with other devices when it is on and absorbs a high current.

with intelligent forced cooling design, low fan noise and high electrical efficiency

* To adopt tech. of phase-locked loop (PLL) and CPU bus control management system.

* Support to select frequency both manually and automatically to confirm channel; To control squelch by noise lock and tone code lock; Through these method to achieve stable signal.

* With function of latest filter and anti-interference tech. to diaphragming external bad signal and mobile phone signal.

* Operating frequency is from 640Hz to 857MHz; Each receiver has 200 adjustable frequency band; Support 4 receivers to work simultaneously without interference.

Audio adapter, 3.5mm Stereo male Jack to 2x Female RCA , Plastic

* With 1U streamlined cabinet design, class-TR real time tracking power amplifier technology, high efficient amplifying circuit design, and high-fidelity sound quality, perfect to restore

the audio quality.

* Power on soft-start,to prevent absorbing a large current of the grid power ,from interference with other electrical equipment.

* Built-in smart clipping distortion and over-current limit system.

* Built-in 30Hz / 50Hz high-pass filter.

* Built-in automatic temperature control fan cooling system.

* Multiple modes: stereo, bridge, parallel.

* Comprehensive and reliable security protection measures and working status indicator, over-temperature, over-voltage, under-voltage, and over-current, short circuit multiple intelligent

detection and protection system.

Audio adapter, 6.35mm Stereo male Jack to Jack 3.5mm stereo female, Plastic

Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

The Dynacord DSP 260 is a 2-in-6-out speaker controller. It allows you to fine-tune your active speaker systems and adjust the several components to better work together. This controller features a parametric graphic equalizer, a delay function, a crossover, channel EQ, channel delay and a volume control with a limiter for each output. The DSP 260 has a variable lockout function which means you can determine exactly which parameters a user can adjust, something that is particularly convenient if you rent out speaker systems.

The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

- ULN analog console

- 1 editable compressor

- 6 Xenyx Last Gen mic preamps 

- 3-band equalizers “British EQ”

- 24-bit stereo effects processor