ITC - T-205A, Passive Coaxial Ceiling Loudspeaker, 10W 5 "

The T-206BC is an integrated integrated 70v / 100v ceiling transformer. The 70v / 100v transformer technology reduces line losses at longer distances and allows easy parallel connection of multiple speakers.

The 6 "built-in dual-cone paper speaker driver is designed for a wide 80-20kHz frequency response, the multiple 1.25W, 2.5W, 5W and 10W power outlets are useful for different applications, depending on size. of the room and ambient noise environments. The metal grille and ABS baffle are painted in attractive white color. Its type of flush mounting facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The T-104GK is a 70v / 100v ceiling integrated transformer.

The 70v / 100v transformer technique reduces line losses at longer distances and allows easy parallel connection of

several speakers.

The 4 "built-in waterproof speaker driver is designed for wide frequency response at 90-20kHz, multiple 3W and 6W power outlets are useful for different applications, depending on room size and ambient noise environments . The metal grille, ABS baffle and metal back cover are attractive white RAL9016 paints. Its spring clip facilitates and secures the installation.

It is an ideal choice for industrial and commercial applications in the hotel, school, office and factory where background music and pagination are required.

The USB mixer amplifiers have power ratings from 60W, 120W to 240W. They are featured of three microphone inputs, two aux inputs and one EMC input. Priority muting is achieved via EMC input for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

The ITC TS-9000S is an open programming control platform with the latest 32-bit integrated preloader and up to 210 MHz processing speed, 8 inputs and outputs, 8 relay ports, volume control and one 232, RS485, RS422. Supports 3 TS-NET control buses.

Aywa - A019, Jack/Jack Cable 1m

Aywa - Y016, Jack Cable / Metal Bent Jack 6m 0

Aywa - Y014, Jack/Jack Cable 3m

PCB preamp module for Dynacord PM 600-3 / 1000-3 / 1600-3 / 2200-3

T-2221 is a dual-source music player, built in AM / FM tuner. CD player, MP3, tuner and integrated remote control. USB and SD inputs on the front panel for MP3 player and an AM / FM tuner each with 99 bands.Two florescent screens for display in English CD / MP3 and a separate tuner.

Mixer with 6 speaker selector of source selection area and zone control. Built-in microphone and recorder for recording and storing voice messages easy. High-chime, including remote trigger and volume is provided. Volume control is provided for the microphone, music, mater, record and broadcast messages, lower and treble tone control. Indications include zone selector, source selector, recording status, power, and output level meters. 4 priority levels from top to bottom: remote paging console, Mic1, chime, pre-recorded message broadcast.

2 channel mixer with 10 inputs and every 10 inputs with mic, line and high pass filter selector. Built-in 2/4 pre-series chime, remote chime trigger and local trigger on the front panel. The volume controls are provided above chime, MIC1, inputs 2-10, channel 1 and channel 2 masters. Bass and treble tone control are provided for both channels 1 and 2.

T-2129 is CD player with SD / USB inputs that support CD / MP3 discs. remote control to change input models whether SD or USB. Automatic read SD card when no disk input or USB is used. Stereo left channel and right channel output.

The T-1S01 is one - with five balanced microphone inputs, three AUX level inputs and one of the CEM level inputs (priority). priority mute is performed via MIC 2 and EMC for alternate music for call and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble are provided for overall tone control.

Dynacord Amplifier Module Suitable for Dynacord A112A Speaker

Amplifier module for Dynacord A115A loudspeakers

Wide voltage input. No-load power: <0.5W. Single output, short circuit protection. Efficient and reliable. According to the different regions, self-optional AC power cables. Suitable models: TS-0221, TS-0670HY

Short Microphone Stand, telescopic. 

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4" phone jack and XLR type. 2 line inputs by dual RCA type are also provided.

The T-774HWP is an integrated 70 wall bracket / 100V loudspeaker transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows an easy parallel connection of several loudspeakers. The 4" 1.5" 2-way speaker driver is designed from 80 Hz wide frequency response to 20 kHz, the power of the multiple plugs 2.5, 5, 10 and 20W are useful for different applications varies from the size of the room and an ambient noise environment. The metal grille, ABS housing and stainless steel mounting bracket are white in color. Easy and secure wall bracket installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in hotels, schools, offices and factories where background music and pagination are required.

Universal microphone clamp, Black

Jack mono male / XLR female 10m

Y010, Jack / Jack Cable 3m

Male Mono Jack / Male Mono Jack 30 cm - White

Male Mono Jack / Male Mono Jack 30 cm - Orange

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit

Male Mono Jack / Male Mono Jack 30 cm - per unit 0

Audio adapter from 1/4″ stereo female Jack to 1/4″ stereo  female Jack