The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

Aywa - Y050, Mini stereo male jack / 2 male RCA 3m

- ULN analog console

- 1 editable compressor

- 6 Xenyx Last Gen mic preamps 

- 3-band equalizers “British EQ”

- 24-bit stereo effects processor

stereo male Jack / stereo male Jack, 3m

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

Grab a Numark M6 USB DJ mixer and the power and freedom to perform the way you want to. With four stereo channels and professional connection options, the M6 USB lets you hook up turn tables, disc players,  An assignable, user-replaceable crossfader with two slope selections lets you either smoothly fade between sources or snap back and forth for scratching. On top of that, you get two mic inputs, a USB connection, and 3-band EQs on all four channels. Talk about a real workhorse DJ mixer!

DJs always need a dependable mixer. M101USB fits the bill perfectly as a highly adaptable two-channel mixer for virtually any DJ. M101USB lets you get up and running quickly whether you’re using a computer, turntables or CDs. M101USB is right at home at weddings, parties, clubs and everything in-between.

The Native Instruments Traktor Audio 2 Mk2 compact USB DJ audio interface gives you the connections and functionality you need to take your show anywhere with your laptop or iOS device. The Traktor Audio 2 interface includes two stereo line/headphone outputs, allowing you to easily plug it into a mixer or a PA. Not just DJs but iOS users in general dig the Traktor Audio 2 Mk2 because its high-quality AD/DA converters give you stellar 24-bit/96kHz quality, making sure your tracks come through loud and clear, and its plug-and-play compatibility with iOS devices even includes charging your iPhone or iPad if you connect an optional power supply. Travel light and still sound great with a Native Instruments Traktor Audio 2 interface!

Voltage regulator used to secure your instrument from voltage shocks

Power supply 5000 VA

Voltage regulator used to secure your instrument from voltage shocks

Power capacity 3000VA

Voltage regulator used to secure your instrument from voltage shocks

Power supply 1000VA

Voltage regulator used to secure your instrument from voltage shocks

Power supply 1000VA

Mascot ECM 626 Electret omnidirectional tie microphone.

18-inch active subwoofer with 400w class D power amp.

Under 1.18 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Under 1.15 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

The C 12.2 is a compact, 12 "trapezoidal / two-way full-range cabinet offering very high power handling (500W continuous 2000W peak) and sensitivity of 97 dB 1W / 1m.

limitations do not want to do without the uncompromising Neumann sound. Cardioid directional characteristic and very low self-noise

Applications Due to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios.

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

limitations do not want to do without the uncompromising Neumann sound. Cardioid directional characteristic and very low self-noise

Applications Due to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

Single Jack Male / XLR Female 3m