The VL 212 from DYNACORD is a 2-way fullrange cabinet that has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications.

The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.

The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.

The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.

TS 200 is an extremely compact, two‑way high‑performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a box of its size.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

The D12T is primarily designed for fixed installation sound reinforcement applications in 100-volt audio distribution networks. It can also be used at events where long cables need to run from the amplifier without power loss. The D12T is equipped with the same components and achieves the same impressive figures (for SPL, reproduction range etc.) as the D12R. For integration into a 100-volt network, the speaker is also equipped with a low-distortion toroidal audio transformer, and cabinet power (300-watt, 150-watt, or 75-watt) is determined by the wiring of the incoming connector. The D12T is ideally suited as a full-range cabinet for the reproduction of speech and music.

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light‑weight, extremely robust high performance professional 12" 2‑way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.

Two new members have been added to the D-Lite series first introduced by DYNACORD in 2005: the D8 two-way full-range speaker system and the SUB 112 twelve-inch subwoofer. These round off the series—which has proved successful all over the world—in a harmonious fashion.Both new models in the D-Lite series are the result of a well-considered process of optimization. Their most significant features—enormous sound pressure levels, low distortion, compact dimensions and subtle styling—make the D8 and SUB112 equally suitable for mobile and fixed professional sound reinforcement applications.

Dynacord's D12 D-Lite is a lightweight passive speaker with a rugged housing, a 12-inch woofer and a 1-inch compression driver. This speaker is suitable for both mobile and fixed installations. The D12 can handle 300 watts continuously and peaks of up to 1,200 W at a maximum sound pressure of 139 dB. Its numerous mounting options make this an incredibly versatile speaker.

This lightweight speaker is perfect for entertainers, presenters, schools or multi-media applications, for instance. Its transparent sound is great for any type of music, but also for speech and vocals. The sound is highly defined and can hold its own under virtually all circumstances. This passive speaker is a great performer, whether at high or at low volumes. The D12 can be driven by an amplifier or a powered subwoofer, creating a compact sound system that can easily be transported in the boot of your car.

FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.

The new ProMaxX comes with B&C’s world renowned compression driver technology and uses a purpose built FBT amplifier with a switch mode power supply at its heart. ProMaxX aims to combine Italian quality and style to provide you with premium quality equipment. A powerful onboard Digital Signal Processing Platform (DSP) is available to users, and the intuitive graphical interface makes it easier than ever to use. The menu driven system is located on the rear of the speaker and is navigated by a single rotary knob with push to select functionality.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

Large vented bass-reflex subwoofer 2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil Frequency Response from 30Hz to 100Hz Class D amplifiers delivering 2000Wrms with switch mode power supply DSP with 6 EQ presets, cardioids and infra configurations, delay 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint Six FBT design aluminum handles Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base. M20 top mount stand socket Optional 4 swivel mount casters 100 mm (4’’) on request Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift Specifications: Configuration: 1 Way Built-in amplifier LF/HF: 2000w RMS Built-in amplifier peak LF/HF: 4000w Frequency response: 30Hz - 100Hz Low Frequency woofer: 2x 18" with 3" VC Maximum SPL cont/peak: 135dB / 139dB Dispersion: Omnidirectional Input impedance: 22kohm Crossover Frequency: Preset Dependent AC Power requirements: 1840VA Input connector: XLR with link out Power cord: 5m PowerCon True1 Net Dimension (WxHxD): 1000 x 549 x 730mm Net Weight: 90kg Transport Dimension (WxHxD): 1150 x 740 x 900mm Transport Weight: 102kg

The ground-stacked VHA118SA is an exceptionally powerful and versatile subwoofer that sets a new standard for SPL to size ratio. Comprising a single 18" long excursion B & C woofer, the birch plywood, bass reflex sub, features a 2,500W Class-D amplifier module with 143dB SPL and offers a selection of six entirely rewritten preset algorithms.

The FBT MITUS 118S, 18" compact vented band-pass subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206L line array for ground stack applications with optional metal base. The FBT MITUS118S shall meet the following performance criteria: Frequency response of 36Hz to 200Hz,Frequency sensitivity of 101dB, Maximum SPL of 138dB peak, Recommended power amplifier 1000W RMS/4 Ohm. The FBT MITUS 118S feature 0.70" Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter and two FBT design aluminium handles. The rear facing input panel provides 2 Neutrik NL4 speakon female connectors. 

Processed Active Speaker 1000W - 128dB SPL 2-way bi-amplified bass reflex FBT Custom 380mm (15) LF woofer with 64mm (2.5) voice coil FBT 25mm (1) throat /35mm (1.4)voice coil HF compression driver 42Hz to 20KHz Frequency Response 90° H x 60° V constant directivity horn 30° or 45° monitor taper Features and Specifications: Polypropylene molded enclosure designed to eliminate unwanted resonances Custom FBT Speakers with high linear excursion capability and efficiency Compression driver with 25mm (1) throat and 35mm (1.4) voice coil 1000W 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume.

The FBT MITUS 115Atwo-way bi-amplified speaker system shall incorporate 1 x 15” B&C neodymium woofer with 3” voice coil and 1” exit B&C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°. The FBT MITUS 115A shall meet the following performance criteria: Frequency response of 46Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. The FBT MITUS 115Aprovides a DSP with 8 EQ presets. The FBT MITUS 115A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.

Steeped in classic Italian design and acoustic expertise, VERTUShas been created with the aim of extending true line array technology, an undisputed success in the field of professional audio, into a new range of applications within both the live and fixed installation fields. The column system is compact and elegant, with a refined yet functional design. Most importantly it offers an uncompromising quality capable of successfully solving applications where conventional systems are inadequate.

The FBT Mitus 118FS and FSC are cardioid arrayable and flyable Passive Subwoofers. Designed and manufactured by FBT’s renowned engineers and artisans, the Mitus 118FS/FSC is a prime example of audio perfection with ergonomic innovations.

The Muse 118FSA is a true reversible flyable subwoofer.  Designed and manufactured by FBT’s renowned engineers and artisans, the Muse 118FSA is a prime example of audio perfection with ergonomic innovations.  The Muse 118FSA is a hybrid loaded 18’’ neodymium subwoofer designed to suspend from the Muse flybar either facing forward or rearward.  When flown facing rearward, the sub’s user removable grille can be moved by the user to the new “front” of the enclosure and the amplifier module can be moved to the new ‘rear’ of the enclosure, thus obtaining aesthetic consistency when flown with additional forward facing Muse 118FSA’s.  Thus, when creating a cardioid sub package, no additional hardware is needed to easily achieve sleek visual continuity.

A true line array system encompassing advanced technology and refined Italian engineering – these are the principles behind MUSE, a new sound reinforcement solution from FBT that redefines the modern line array in terms of power, size, light weight, flexibility and ease of use. True modularity means that MUSE is ready for any application, from a small installation using two enclosures to a large outdoor concert deploying 16 speakers per hang.

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The 8CL51 from B&C Speakers is part of the family of lightweight speakers made at the request of speaker manufacturers who want maximum quality and easy transport. Ideal in combination with a 1" 2-way motor or as a replacement in many amplified speakers.