* With desktop design, elegant appearance, light weight, and easy to carry.

* It can be used in different sound effect places. This series include 20W, 40W, and 60W, which can be selected according to room size inquiries.

* Unmatched sound quality, it can connect 4~16Ω output, meanwhile it can connect 100V output, not only can play short distance beautiful music, but also can broadcast long-distance beautiful voice.

* The output terminal use standard 6.3 audio microphone jack and line input uses RCA jack, to provide users with different audio input interface options.

The USB mixer amplifier has a power rating of 120W .. They are featured of three microphone inputs, two aux inputs and one EMC input.Priority muting is achieved via EMC input for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

* Built-in 10 zone selector and paging selector, which can be expanded to 300 zones

* Work together with remote paging console for paging and control over 10 zones.

* Individual zone, group zones, 10 zones and all zones paging through remote paging console.

* With memory function when power off, can realize the restoration after electricity be turn on

* 2 channels 10 zones amplifier inputs(A channel for BGM amplifier and B channel for EMC/paging amplifier), in this way, the other zone's music system will not be interrupted when some zone is selected for paging.

The basic public address mixer amplifiers have power ratings from 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 1 EMC input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.

The T-6223 is a public address emergency switch which can provide an ideal public address solution from small to big places such us mosques, schools, hotels and factories to train stadium and air stations.

* Four channel amplifier in a 3U 19”rack mount design

* All source inputs could be matrix assigned to different 4 zones outputs simultaneously

* The 5 channel inputs & Mp3 input are designed with separate bass, treble and volume control

* Three microphone/line inputs with phantom power and gain control

* Two aux inputs by RAC with gain control

* Mp3 player with SD and USB inputs, separate power supplied module

* Built in Tuner audio source

Using the buttons; provide shortcuts for recording, playback, mode selector or to limit the volume.

4 types of conference modes: Fist-in-premier-out / Normal / Free / Apply.

With the limit function for the amount of active microphones: The optional limit amount is 1/2/4/6, and the president unit is unlimited.

1 host can be connected to up to 30 conference microphones;

The method of connecting conference microphones is "Hand-in-hand", which is easy to install and maintain;

- 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

- 6 Channel Partition output, and partition volume independent control.

- Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

- Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With the MP3 remote control, support power off memory function, MIC recording function.

- When the alarm generator starts, background music will be closed and6 partition output will automatically open to maximum output volume.

- Built in 24V DC power input.

- Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* 4 Channel Microphone and 2 line input, treble and bass can be controlled separately .

* 6 Channel Partition output, and partition volume independent control.

* Built in bell. Bell tone optional: 4 tones and 2 tones (built-in), alarm generator.

* Mp3 decoding module supports usb/sd/bluetooth/fm radio playback function. With

the MP3 remote control, support power off memory function, MIC recording function.

* When the alarm generator starts, background music will be closed and6 partition

output will automatically open to maximum output volume.

* Built in 24V DC power input.

* Mic1- 4 built-in 48V phantom power supply, and switch can be independently

controlled.

power output: 480W

One microphone signal input, line signal input and AUX, two remote microphone inputs.

Separated treble, bass and volume control. Master Volume Control.

Selectable recording signal, internal signal input and external signal selection.

When the START and GND short circuit is short, the emergency information will be broadcasted all the time, it will only stop when the user stops it manually. PULSE and GND trigger the short circuit once, the emergency information plays five times and then stops.

With the 24V input function, the rechargeable battery is 45-60 A / h, the charging current is 2-5 A.

With the 5-zone line detection function, press the corresponding button to perform real-time detection. It can define the test frequency: test every 10 minutes, 12 hours or 24 hours. If there's a foul line when there's a buzzer.

Support digital audio transmission technology, simultaneous interpretation channel number 31 + 1, speech separation technology.

Great expansion features: 4096 system microphone capacity, hand-to-hand connection, hot swapping support.

Fully 4-channel meeting unit output interface with output circuit indicator. When the circuit is normal The LEDs flash, the LEDs go out when the circuit is disconnected.

Four microphone management modes: FIFO / NORMAL / VOICE (acoustic) / APPLY.

Speech microphone quantity and time selector: 1, 2, 4 and 8 president units are free to control.

The VA-2000MA is the head management and control unit of the Voice Alarm and Evacuation System (EVAC). It is a modular design to ensure a simpler and flexible configuration, each modular is 4 zones, and the maximum can be extended to 64 zones. The EVAC system includes a fully automated function, automatic monitoring of the zone status, automatic equipment.

The T-6600 features background music, 16-zone paging, and voice message alarm. It has an integrated audio input of 8 inputs and 16 outputs. It has a built-in 2GB MP3 player with memory card via an SD card slot.

VA2000MS is an automatic amplifier switching that is used to automatically switch to a standby amplifier when the main amplifier has a fault. The backup modes are flexible and configurable by the client, because there are options of a standby mode for eight, two standby for eight, three standby for eight and four standby for eight more, in short, this is a matrix change four to eight, which helps in the development of a change, meets both the most economical solution of a standby mode for eight and the solution the more reliable for four in standby for eight. Automatic switching of the amplifier could be used in isolation or integrated into the VA-2000 voice evacuation system. Standby mode will be configured in the system software configuration.

- 8 independent audio zones for simultaneous broadcasting.

- 8 audio sources and 8 control panels.

- Volume, gain, bass and treble control for each input.

- 2 paging consoles for remote management.

- Multi-zone paging for targeted announcements.

Conference system offers discussion and voting functions. One controller supports 128 units, extension up to 4096 units. first in / first out, normal, free and apply four meeting modes. Voice microphone quantity picker 1, 2, 4 and 6 speaker units are free of control. All of the system are transmitted by cable 8 standard conference system and guaranteed pins. Three channel outputs for connecting microphone units. All equipment is manually connected by hand for easy wiring and maintenance. Integrated in a digital equalizer for the signal processor and remove the noise. Two line outputs for the sound amplification system. Voting and data management features could be done by linking to the PC where the software installed. Supports 6 cameras by bonding together with the TS-0690 Automatic Video Tracking Controller. Ensure the protection of the 8000V static electricity ground line.

The 4-channel power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack type and height 3U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and rated power of 350W per channel that offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and 3U height. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

The digital ambient noise controller is designed to work with the ambient noise sensor to adjust the output level based on the detection of the surrounding ambient noise level.

THE TH-0500M is a wireless infrared conference system controller, the meeting features modes, speech limit, rotation mode. external video device, which allows speaker images tracking the location. The panel has for system setting with four 160x32 dot matrix LCD function keys and setting. Two types of audio signal output terminals that can be an external connected to the recording or audio equipment. Can be installed in a standard 19-inch cabinet.

Mixer Amplifier T-6635 is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

The VA- is firefighter control panel that must be used by the firefighter at the fire center. Fireman control panel communicate with the controller via a CAT5 cable up to 1Kms distance. Four message buttons with security cover are provided to push the alarm. PPT handclip microphone is also provided for the firefighter announcement in case of emergency. Its standard configuration is 16 zones, can be extended to 64 zones of connection with the extension control panel.

Mixer amplifier is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and rated power of 240W per channel which offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and height 2U. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

The 4-channel power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack mount type height and 2U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

Mixer amplifier is applicable in the bank, mosque, school, hotel, restaurant, theme centers and shopping center. It integrates 2 audio sources into a 5-zone mixer amplifier, plus 3 microphones and an additional auxiliary input. 2 USB ports on the front and rear panel provide easy access and operation of the installer and the end user.

2-channel amplifier with 120W output, built-in 20-byte DSP and built-in delay / repeat / echo and reverb characteristics. Echo & reverb with separate volume control. Extended protection for high temperatures, short circuits and overloads.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 universal microphone inputs of 1/4 "phone jack and XLR type. Double RCA type line are also provided.The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which ensure the control of the flexible zone.Every 6 inputs are equipped with low / tone controls. A T-318 of the remote zone exchange console 5 is provided for the announcement and control of another location.Master, Mic1-4, volume control line1-2 & 6 separate treble / bass Tone control for each input are provided, as well as microphone 1 priority over the other inputs Each channel input with separate treble and bass control Built -Family for fire alarm system, EMC input , integrated chime, 2/4 tone chime selector, chime remote trigger. The TEL entry could be used as a telephone system on a public address system. The REC output for tape recorder and the PRE output, AMP input for adding processo r additional signal as mixer, graphic equalizer. Complete protection includes short circuits and thermal protection, current limiter and overload.