The T-6216 is 16 channel power sequencer with standard chassis design and 2U aluminum alloy panel, custom design handle, good appearance and convenient. It is featured with 16 power outputs, electronic lock switch. 1 short circuit triggered signal input. 1 extensible output triggered by short circuit, it can connect a timer, intelligent machine to achieve automatic control.
Subcategories
-
Setup Amps
-
Setup Speakers
-
Setup Microphones
-
Mixers / Matrix for...
Mixers / Matrix for installations
-
Auxiliary Equipment
Auxiliary Equipment
-
Accessories for...
Accessories for installation
Active filters
ITC - T-120AP, Mixer amplifier with cooling and muting desktop, power 120W120W amplifier desktop mixer with cooling and muting function. MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2, 3 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 416 ohm speaker output. 120 or 230 V AC operation. Mic13, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.
- 30 W rated power
- Compact 5-inch woofer driver
- Supports 70/100 V lines
- Low-impedance 8 Ω operation
- Adjustable wall bracket included
The basic PA mixer amplifier with 120W nominal power.
- Long-throw 4-inch woofer driver
- Integrated 15 W transformer
- Supports 70/100 V lines
- Weather-resistant IP54 rated design
- Wide 110° × 110° coverage
Amplifier includes 3 microphone inputs, 2 auxiliary inputs and one EMC input. It has a USB port and a fluorescent screen to display the sound number. It is suitable for the exchange and background music system. It has high temperature, overload and short circuit protection.
The basic PA mixer amplifier with 60W nominal power. They are presented with 3 microphone inputs, 2 inputs and 1 at the EMC inputs. priority mute is performed by EMC1 for compelling reasons other inputs except Mic1 on the front panel. Individual gain controls are provided for Mic 1-3 and 1-2 Aux, bass and treble and master volume control are provided for overall tone control. 70V, 100V and low impedance speaker outputs 4-16 ohms are provided. Extensive protection against short circuit, overload and high temperature.
60W desktop mixer amplifier with cooling and muting function. MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2, 3 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 416 ohm speaker output. 120 or 230 V AC operation. Mic13, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.
- Compact 6 W loudspeaker
- 70/100 V line compatible
- Speech and music reproduction
- EN 54-24 voice alarm certified
- ABS cabinet metal grille
The T-218A is a high-performance remote zone paging console that works with the T-6212 (A) area paging controller for remote paging and control of a multi-zone system. Multiple paging modes (all zones, group zones, 10 zones and individual zones) could be reached with this paging console.
- Compact angled 6 W loudspeaker
- Clear speech intelligibility reproduction
- Professional 100 V operation
- Robust ABS cabinet construction
- Quick easy wall mounting
- Powerful 240-watt rated output
- Six microphone or line inputs
- Independent two-zone audio distribution
- Voice-activated emergency priority override
- Integrated two-tone announcement chime
Tuner / FM with stereo RCA audio output with automatic button for channel scanning. manual channel search buttons. front panel power switch on / off, LCD displays station selected. FM 75 ohm antenna included, AM antenna included, IR remote control to control all included functions, RCA stereo audio output connectors.
- 120-watt rated output power
- Six microphone or line inputs
- Two-zone audio distribution control
- Voice-activated emergency priority override
- Integrated two-tone announcement chime
T-318 is a remote paging console of the 5-zone TI-120S / TI-240S / TI-350S communication amplifiers whose distance up to 1Kms. The exchange console could be powered by the mixer within 50 meters, while the additional DC 24V power supply is needed when the distance is more than 50 meters.
The T-218 is a high-performance remote zone paging console that works with the T-6212 zone paging controller for remote paging and control of a multi-zone system. Multiple paging modes (all zones, group zones, 10 zones and individual zones) could be reached with this paging console. Features include the ability of 16 microphones and 300 search zones operate at the same time, the T-218 easily distinguish T-6212 with its predefined ID address. T-218 'Exchange System' with priority over the background music system.
- 350 W output power
- USB and Bluetooth playback
- 100 V / 4-16 Ω outputs
- Microphone priority function
- 19-inch rack mount
TH-0511 is one with a low power circuit and the frequency range is 6 MHz to 8 MHz. Spherical reception of 150 degrees, covering signals in a wide range.
The T-328 remote paging console works with T-6245 mixer for remote control and announcement. Its 6 zone selectors provide a direct command interface for easy control and paging of the area. The alarm button automatically activates the pre-recorded message 3 on the other aux inputs. It could be powered by the mixer at less than 50 meters, while additional DC 24V power is needed when the distance is over. The two RJ45-type communication ports are used to communicate with the mixer and beside the paging console. Dipswitch could be distinguished by the mixer making 6 paging consoles work simultaneously possible.
- Six-zone system pre-amplifier
- Single or dual-channel operation
- Two call-station input channels
- Three background music inputs
- Emergency priority and chimes
The T-8000B remote control with audio input module is connected with T-8000 by universal industry standard CAT 5 for each volume setting of eight zone or remote line and microphone input at a remote location and different from the control center. Each controller provides eight RJ45 ports for the remote control with the audio input module. The CAT 5 cabling is not only presented cost-effective, practical, but also the integration of communication, audio transmission and power supply DC 24V RS 485 together. This module family also has simpler functional module of T-8000C and T-8000D.
- 20 W rated power
- Professional two-way speaker system
- Supports 70/100 V lines
- Weather-resistant IP65 rated design
- EN 54-24 certified loudspeaker
MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2 by 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 4-16 ohm speaker output. AC 120V or 230V operation. Mic1-2, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.
- 30 W rated power
- Compact 5-inch woofer driver
- Supports 70/100 V lines
- Low-impedance 8 Ω operation
- Adjustable wall bracket included
T-319 is the remote paging console with mixer T-2S01, whose communication distance up to 1 km. The exchange console could be powered by the mixer within 50 meters, while the additional 24V DC power supply is needed when the distance is more than 50 meters. This microphone inputs with the highest priority on all other inputs.
MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2 by 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 4-16 ohm speaker output. AC 120V or 230V operation. Mic1-2, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.
MIC1 input by combi connector of 1/4 "jack and XLR with phantom power, Mic2 by 1/4" phone jack, AUX1 input by dual RCA, input by such Phoenix connector. Line output by RCA dual type. Mic with Vox priority (with Vox level control) and telephone input with secondary input on all other inputs. 100V, 70V and 4-16 ohm speaker output. AC 120V or 230V operation. Mic1-2, AUX1, tel, master volume control and bass / treble tone control. High temperature, short circuit and on the protection of the load.
T-531 is a phantom power powered amplifier with red ring indicator for service. It includes the convenient XLR connector and integrated low frequency attenuator.
The T-770T is a two-way projection speaker built into the 70 / 100V transformer. The 70 / 100V transformer technology reduces line losses over longer distances and allows for easy parallel connection of multiple speakers.