TS-122 best combination of dual high power 12-inch low frequency transducer and 44 basic titanium treble, which makes the power and quality of tone both get hit. 4ohms impedance and sensitivity of 100 dB. 45Hz to 20kHz frequency response. 90 ° horizontal symmetry and 45 ° vertical symmetry. 18mm high density edge, surface of the dark gray paint spray area.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and rated power of 240W per channel which offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and height 2U. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

- The classic studio microphone

- Variable large diaphragm microphone

- Frequency range: 20 Hz - 20 kHz 

- Switchable 10 dB pre-attenuation 

- Accessories included: Shock mount & wood case

The 4-channel power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack mount type height and 2U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

Mixer amplifier is applicable in the bank, mosque, school, hotel, restaurant, theme centers and shopping center. It integrates 2 audio sources into a 5-zone mixer amplifier, plus 3 microphones and an additional auxiliary input. 2 USB ports on the front and rear panel provide easy access and operation of the installer and the end user.

2-channel amplifier with 120W output, built-in 20-byte DSP and built-in delay / repeat / echo and reverb characteristics. Echo & reverb with separate volume control. Extended protection for high temperatures, short circuits and overloads.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 universal microphone inputs of 1/4 "phone jack and XLR type. Double RCA type line are also provided.The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which ensure the control of the flexible zone.Every 6 inputs are equipped with low / tone controls. A T-318 of the remote zone exchange console 5 is provided for the announcement and control of another location.Master, Mic1-4, volume control line1-2 & 6 separate treble / bass Tone control for each input are provided, as well as microphone 1 priority over the other inputs Each channel input with separate treble and bass control Built -Family for fire alarm system, EMC input , integrated chime, 2/4 tone chime selector, chime remote trigger. The TEL entry could be used as a telephone system on a public address system. The REC output for tape recorder and the PRE output, AMP input for adding processo r additional signal as mixer, graphic equalizer. Complete protection includes short circuits and thermal protection, current limiter and overload.

Mixer amplifier is suitable for PA applications such as background music, area paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

The power amplifier is designed for commercial and industrial sound applications. 3U rack mount design in the type, the nominal power of 500W which offers a wide choice to meet the different needs of the size sound system. The two balanced and unbalanced line inputs make it selectable for the installer, balanced line output powers to another power amplifier as well as secures the signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs are convenient for installation when the different selection of matching speakers. A master volume control is included. Complete protection includes clamp, short circuit, high temperature and overload. Power indications, signal, clip, protection and temperature.

The inputs and outputs can be matrix chosen, so it is a 4-channel integrated high-audio matrix system solution with MP3 player for the hotel, shopping center, sports center, entertainment center, etc.

Each of the inputs can be easily designed for different four zones by the selector of the front panel, in addition each of the inputs are powered with separate bass, treble and volume for a precise sound effect for each zone.

400W 2-way 15-inch speaker with a professional 8ohms impedance and 100dB sensitivity. 45Hz to 20kHz frequency response. 45 ° horizontal symmetry and 90 ° vertical symmetry. 18mm MDF board and the surface of the dark gray spray paint board. Suitable to use to move the performance. Applicable for disco and KTV rooms.

ITC - TS-6P, Channel Mixer with DSP, 6 Channels

Professional amplifier dual mono symmetrical input structure. A variety of stereo, bridge, parallel input methods. Class H fan cooling system of the amplified power circuit is powerful, integrated automatic temperature controlled. HF sound quality, reducing the perfect audio quality, allowing players to play brightly.

The T-2700 is a built-in stage waterproof horn speaker 70v / 100v transformer. The 70v / 100v transformer technology reduces line losses over longer distances and allows for easy parallel connection of multiple speakers. The 12 "horned speaker driver is designed with a frequency response of 120 to 18 kHz, the rated power output of 150 W can meet different applications varies in room size and ambient noise environment. The metal enclosure and the metal support are black in color. Easy and secure wall mount installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in the vast outdoor area of the station, the stadium where background music and pagination is needed.

18-inch professional speaker 400W 2-way has an impedance of s and sensitivity 100dB. 20Hz to 500Hz frequency response. Box in 18mm HDF and the surface of the dark gray spray paint.

The public address base amplifier with rated power of 350W. They are presented with 3 microphone inputs, 2 inputs and 1 at the EMC inputs. priority mute is performed by EMC1 for compelling reasons other inputs except Mic1 on the front panel. Individual gain controls are provided for Mic 1-3 and 1-2 Aux, bass and treble and master volume control are provided for overall tone control. 70V, 100V and low impedance speaker outputs 4-16 ohms are provided. Extensive protection against short circuit, overload and high temperature.

The power amplifier is designed for commercial and industrial sound applications. 3U rack mount design in the type, rated power of 350W which offers a wide choice to meet the different needs of the size sound system. The two balanced and unbalanced line inputs make it selectable for the installer, balanced line output powers to another power amplifier as well as secures the signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs are convenient for installation when the different selection of matching speakers. A master volume control is included. Complete protection includes clamp, short circuit, high temperature and overload. Power indications, signal, clip, protection and temperature.

T-6236B is one with a MIC gooseneck and two portable VHF pickups with 60W built-in amplifier, 60W column speaker with a tweeter and three woofers. A lamp is also provided. A number of input and output makes it easy to increase its capacity. It is available in white or black finish.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and nominal power of 120W per channel that offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and height 2U. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

Amplificateur comprend 3 entrées microphone, 2 entrées auxiliaires et une entrée CEM. Il a un port USB et un écran fluorescent pour afficher le numéro de son. Il est adapté pour le système de musique d'échange et de fond. Il a une température élevée, surcharge et protection contre les courts-circuits.

The power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack mount type height and 2U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

VA-2000FM is used remotely the firefighter microphone with VA-2000 voice evacuation system, the system's ability to nine microphone inputs remotely for both microphone and a remote firefighter microphone. Fireman microphone is equipped with a PTT-clip hand microphone high sensitivity for easy hand use. Different priority could be set up from the software to ensure that the queue exchange system. Microphone's status could be constantly monitored and displayed. Firefighter microphone could be placed at the fire department, room, distance from the controller up to 1Kms by CAT5 cable. It is used by the firefighter to activate predefined evacuation messages to the designated area or all zones in the emergency room. EVAC, ALERT, TEST and CLEAR ALL four voice message buttons with covers to ensure the protection from mishandling. Each 16-zone firefighter microphone capacity, while the zone extension panel (8 zones) can be interconnected for expansion of the zone, up to 64 zones.

Amplifier includes 3 microphone inputs, 2 auxiliary inputs and one EMC input. It has a USB port and a fluorescent screen to display the sound number. It is suitable for the exchange and background music system. It has high temperature, overload and short circuit protection.

Processor is designed by the latest digital technology, in collaboration with the meeting host, delegate unit and software. Support many cameras. The can communicate with RS232 socket equipment, such as computer or video switching matrices. Support for many types of meeting mode in free chat mode, FIFO mode and speech limit mode.

The T-521UF is UHF wireless receiver designed by professionals according to KTV private room. Many machine games can use this system at the same time and can escape various interferences easily. The setting and the lock function belonging to the transmitter and receiver can avoid disoperation in use.

TS-12 performances mieux que TS-10. Basse fréquence est plus puissant et adapté à la nécessité de l'utilisation de sortie haute pression du lieu. Il est indispensable à la performance à grande échelle dans le système de sortie à haute fréquence. impédance 8 ohms et une sensibilité de 100 dB. 50Hz à 20kHz réponse en fréquence. 90 ° symétrie horizontal et 45 ° symétrie vertical. 15mm enceinte de bord à haute densité.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and nominal power of 120W per channel that offers a wide choice to meet the different needs of the size sound system.

2-way professional speaker, two frequencies of small sound boxes at the level of professional surveillance. Adopt high-powered titanium treble. Matched with high-frequency 10-inch power transducers, make it 200 / 100W power when work is still easily, the medium high frequency is more powerful bright. Apply to the karaoke room, disco room and other small places of high fidelity amplification.

The T-521UP is UHF wireless dealer designed by professionals according to KTV private room. Many machine games can use this system at the same time and can escape various interferences easily. The setting and the lock function belonging to the transmitter and receiver can avoid disoperation in use.

Infrared wireless discussion video chairman unit, offers the latest digital control design. With elongated microphone bar for choice. Injured capacitive sensor head, equipped with replaceable windshield. LCD screen with black field, red letter or black.