The Dynacord VL 152 VariLine Passive PA Speaker is made of birch plywood is resistant against wear and tear on the road. The surface is painted with a black 2-component paint that is easy renovate or touch up if needed. The Dynacord VL 152 VariLine Passive PA Speaker has two rugged DND 12350 transducers for the low frequencies and mid frequencies. The in-line topology ensures excellent pattern control even for a low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn which is equipped with an Electro-Voice ND6 1.4” driver.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all‑electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible power reduction.

The FBT MITUS 218S, 2 x 18" large vented bass-reflex subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBTMITUS 206 Line array for ground stack applications with optional MTB206 metal base.

The FBT MITUS 118S, 18" compact vented band-pass subwoofer is the perfect low-frequency extension for the MITUS range and the ideal companion for the FBT MITUS 206L line array for ground stack applications with optional metal base. The FBT MITUS118S shall meet the following performance criteria: Frequency response of 36Hz to 200Hz,Frequency sensitivity of 101dB, Maximum SPL of 138dB peak, Recommended power amplifier 1000W RMS/4 Ohm. The FBT MITUS 118S feature 0.70" Baltic birch plywood construction covered in a scratch resistant black paint with a M20 top-mounted stand adapter and two FBT design aluminium handles. The rear facing input panel provides 2 Neutrik NL4 speakon female connectors. 

Boasting a power handling of 1000W and 4000W continuous peak, Sub 2.18 can be used universally for two-way or three-way active systems.

Under 1.18 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

Under 1.15 is the ideal bass extension for Corus C 12.2 or 15.2 C extended range cabinets.

These speakers are ideal companions for small, midsize concerts, bringing the legendary quality of DYNACORD to the budget and offering features you would never expect in this range. Equipped exclusively with high-quality components, A-Line loudspeakers stand out in their class thanks to their high-powered capabilities and 15mm thick plywood cabinets that are like light because they are rugged.

18-inch professional speaker 400W 2-way has an impedance of s and sensitivity 100dB. 20Hz to 500Hz frequency response. Box in 18mm HDF and the surface of the dark gray spray paint.

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high‑power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

The TX1181 uses the EVS-18S, a high excursion 18” woofer, coupled to well braced enclosure with large, low distortion ports, to add high impact bass response to any fullrange loudspeaker. An integrated low pass filter allows the TX1181 to be connected in parallel with a TX1122 or TX1152 on a single amplifier channel, eliminating the need for additional amplifier channels and processing.

Create a powerful full-range system with the Electro-Voice ELX118P. Designed to complement your ELX powered speakers, this subwoofer's 18" low-frequency driver and 700-watt amplifier deliver abundant bass and room-filling volume. This powered sub's XLR/TRS combo input makes connection easy, and installation is easier. Getting optimal performance out of the ELX118P is effortless, thanks to its easy-to-use Subwoofer EQ switch. The Electro-Voice ELX118P's rugged wood construction is built for the road, and its light weight, built-in handles make transportation a breeze.

The FBT SUBLINE 118S is an extremely compact bass-reflex design subwoofer with high SPL and punch. The FBT SUBLINE 118S feature 0,70" birch plywood construction covered in a scratch resistant black paint with two aluminum carrying handles; an M20 top mounted stand adapter allows satellite speakers, such as the FBT speaker series and others, to placed above the subwoofer cab. The FBT SUBLINE 118S features a 18" high excursion magnet woofer with 3" voice coil. The FBT SUBLINE 118S is able to produce a max SPL of 136dB and handles 1200W RMS. The control panel features 2 x Neutrik Speakon NL4MD-V connectors. External digital processor required: FBT DLM26 Digital Loudspeaker Management.

The FBT Mitus 118FS and FSC are cardioid arrayable and flyable Passive Subwoofers. Designed and manufactured by FBT’s renowned engineers and artisans, the Mitus 118FS/FSC is a prime example of audio perfection with ergonomic innovations.

The ground-stacked VHA118SA is an exceptionally powerful and versatile subwoofer that sets a new standard for SPL to size ratio. Comprising a single 18" long excursion B & C woofer, the birch plywood, bass reflex sub, features a 2,500W Class-D amplifier module with 143dB SPL and offers a selection of six entirely rewritten preset algorithms.

Passive wooden subwoofer with 15-inch (380mm) 700W RMS / 8 Ohms speaker. The FBT SUBLINE 115S is an extremely compact bass-reflex design subwoofer with high SPL and punch.