With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.

The FBT MITUS 215Atwo-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°. The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers. The FBT MITUS 215Aprovides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, delay, HP filter. The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. 

The FBT J15A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBTJ15Aseries speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.

The asymmetrical shape of the FBTJ15Acabinet also allows use as a powered floor stage monitor. The FBTJ15Ais of two way design incorporating an 15" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 1.8kHz. With a frequency range of 48Hz - 20kHz the FBT J15A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. A front face steel grille protects the speaker from external damage.

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line The new J series is a competitive, value for money range of speakers The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed 'from the ground up' in FBT's R&D laboratories The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets The J 8A and J 5A amplifiers have toroidal transformer power supplies The J 8A has a digital signal processor with 2 pre-sets

The J12a is an Active speaker featuring a 12" LF Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W + 100W RMS 128dB SPL and a standard 35mm pole mount.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The new J Series is a technologically advanced range of products that improve on the performance of the previous Jolly line. The new J series is a competitive market, the value for the price range of the speakers.

The BLX Presenter Wireless System from Shure joins world-class design and construction with simple and easy setup and operation, featuring QuickScan frequency selection and the durable PG185 wearable lavalier microphone for spoken word applications. Legendary sound and performance, right out of the box. Included: BLX4 wireless receiver; BLX1 body pack transmitter; PG185 cardioid condenser lavalier microphone with windscreen and tie clip.

The Shure PG24/PG58 Performance Gear Wireless Handheld Microphone System includes the PG4 Diversity Receiver with PG2/PG58 Handheld Microphone Transmitter, tuned to accentuate the clarity of lead and backing vocals.The PG4 Diversity Receiver features dual internal 1/4" antennas that eliminate potential for antenna misalignment and damage. 

Advancing the concept of line networks in terms of power, performance, weight, flexibility and ease of use, the new Mitus sound system is the real reason for our experience and our passion for excellence.

FBT presents the new generation of the MaxX series, the HiMaxX, in a market where the transalpine manufacturer is already well established. No discretion, both in the size of this box and in its ability to generate "noise". Yes, but a noise rather well reproduced and extended. Your turn to judge. This series will surely benefit from the well-known image of its big sister to make a place for itself. This new line includes five models including the HiMaxX 60 equipped with a 15 "woofer and a 1.4" motor that we present.

This Italian manufacturer of PA speakers has an experience of more than forty years ... it shows and especially it means. While maintaining the tradition that makes FBT a unique brand, this manufacturer is very attracted by the future. Surrounding itself with the best European suppliers, each component of the FBT loudspeakers is carefully chosen from a wide range of very high quality products. After the traditional wooden loudspeakers with the clear sound, the inevitable molded active speakers of the MaxX series, FBT has developed the UNIQUE Line Array system in a single speaker, proving once again its ability to combine development and audio aesthetics

Whether you need a durable microphone you can use for your on-the-go PA system or a handful of inexpensive switchable microphones for your church's worship team, the AKG P 3 S handheld dynamic microphone is just what you're looking for. An easy-access switch lets you instantly mute and "unmute" the P 3 S with the flick of a thumb. A tough wire-mesh cap and an internal windscreen reduce breath noises and plosives - just what less-experienced vocalists and lecturers need. A rugged die-cast metal body also helps to keep the P 3 S safe from the frequent bumps and scrapes of routine live use, making it an excellent all-around performer that's built to last.

The Mitus has two speakers so a 1600 Watt, 4 ohm, 138dB SPL. It features a passive LF and HF internal transducer circuit protection filter, and 2 x Speakon NL with 4MDV.

The FBT Mitus 152 two-way passive reinforcement speaker system must include 1 x 15 "B & C neodymium woofer with 3" voice coil and 2 "B & C neodymium output with 2.5" voice coil coupled to a rotary horn 60 ° x 40 °; thanks to the rotating HF horn, it is possible to create horizontal tables of 2 speakers for a total coverage of 100 °.

New flagship model of the famous series of amplified speakers MaxX FBT, the HiMaxX 40a is the most advanced molded and amplified acoustic loudspeaker and claims to race very largely ahead of the competition. Small in size, the HiMaxX 40a is a concentrate of power with the appropriate technical level to exploit it. The results are there, both in quality and in sound and dynamics.

Mixer Amplifier T-6635 is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

Mixer amplifier is applicable in the bank, mosque, school, hotel, restaurant, theme centers and shopping center. It integrates 2 audio sources into a 5-zone mixer amplifier, plus 3 microphones and an additional auxiliary input. 2 USB ports on the front and rear panel provide easy access and operation of the installer and the end user.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 universal microphone inputs of 1/4 "phone jack and XLR type. Double RCA type line are also provided.The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which ensure the control of the flexible zone.Every 6 inputs are equipped with low / tone controls. A T-318 of the remote zone exchange console 5 is provided for the announcement and control of another location.Master, Mic1-4, volume control line1-2 & 6 separate treble / bass Tone control for each input are provided, as well as microphone 1 priority over the other inputs Each channel input with separate treble and bass control Built -Family for fire alarm system, EMC input , integrated chime, 2/4 tone chime selector, chime remote trigger. The TEL entry could be used as a telephone system on a public address system. The REC output for tape recorder and the PRE output, AMP input for adding processo r additional signal as mixer, graphic equalizer. Complete protection includes short circuits and thermal protection, current limiter and overload.

Mixer amplifier is suitable for PA applications such as background music, area paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

Amplificateur comprend 3 entrées microphone, 2 entrées auxiliaires et une entrée CEM. Il a un port USB et un écran fluorescent pour afficher le numéro de son. Il est adapté pour le système de musique d'échange et de fond. Il a une température élevée, surcharge et protection contre les courts-circuits.

900W RMS amplified professional speaker, DSP digital signal processing, highly efficient Class D amplifier, a very low weight of only 14.8kg, a choice of 6 EQ presets, the renewed FBT sound.

Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements

The MITUS 212 FSA is a new flyable active subwoofer sharing the same width and suspension hardware of the MITUS 206 LA line array flown configurations at the top of a MITUS 206 LA, in a separate column or ground stacked. It increases the low frequency headroom and extend the bandwidth of an array of MITUS 206 LA down to 45Hz. The band-pass enclosure design utilizes 2x12” B&C high excursion woofers with neodymium magnet assembly and is equipped with a Class D built-in amplifier with DSP and switch mode power supply, delivering 1200 Wrms. The MITUS 212 FSA enclosure is built from 15mm birch plywood and has a tour-grade extra strong paint finish, with ergonomic handles and rigid metal grille with internal foam.

The Zoom H1n's dead-simple stereo pickup with unlimited overdubs makes archiving music performances, dialogue, and sound for film easier than ever. The H1n is the successor to the acclaimed H1. Upgraded features include dedicated one-touch buttons for recording, playback, and audio settings; a new 1.25" backlit LCD that reads easily in any lighting condition; slate and test tone generators for simpler A/V sync; auto-record and self-timer functions; a front-facing speaker; and adjustable playback speed for transcription and notation. Whether you use the phase-coherent onboard stereo XY mics or plug in your own sound source via the 1/8" stereo mic/line jack, the Zoom H1n captures your world in glorious 24/96 hi-fi. Note: requires an SD card for recording