Support digital audio transmission technology, simultaneous interpretation channel number 31 + 1, speech separation technology.

Great expansion features: 4096 system microphone capacity, hand-to-hand connection, hot swapping support.

Fully 4-channel meeting unit output interface with output circuit indicator. When the circuit is normal The LEDs flash, the LEDs go out when the circuit is disconnected.

Four microphone management modes: FIFO / NORMAL / VOICE (acoustic) / APPLY.

Speech microphone quantity and time selector: 1, 2, 4 and 8 president units are free to control.

The VA-2000MA is the head management and control unit of the Voice Alarm and Evacuation System (EVAC). It is a modular design to ensure a simpler and flexible configuration, each modular is 4 zones, and the maximum can be extended to 64 zones. The EVAC system includes a fully automated function, automatic monitoring of the zone status, automatic equipment.

The T-6600 features background music, 16-zone paging, and voice message alarm. It has an integrated audio input of 8 inputs and 16 outputs. It has a built-in 2GB MP3 player with memory card via an SD card slot.

VA2000MS is an automatic amplifier switching that is used to automatically switch to a standby amplifier when the main amplifier has a fault. The backup modes are flexible and configurable by the client, because there are options of a standby mode for eight, two standby for eight, three standby for eight and four standby for eight more, in short, this is a matrix change four to eight, which helps in the development of a change, meets both the most economical solution of a standby mode for eight and the solution the more reliable for four in standby for eight. Automatic switching of the amplifier could be used in isolation or integrated into the VA-2000 voice evacuation system. Standby mode will be configured in the system software configuration.

- 8 independent audio zones for simultaneous broadcasting.

- 8 audio sources and 8 control panels.

- Volume, gain, bass and treble control for each input.

- 2 paging consoles for remote management.

- Multi-zone paging for targeted announcements.

Conference system offers discussion and voting functions. One controller supports 128 units, extension up to 4096 units. first in / first out, normal, free and apply four meeting modes. Voice microphone quantity picker 1, 2, 4 and 6 speaker units are free of control. All of the system are transmitted by cable 8 standard conference system and guaranteed pins. Three channel outputs for connecting microphone units. All equipment is manually connected by hand for easy wiring and maintenance. Integrated in a digital equalizer for the signal processor and remove the noise. Two line outputs for the sound amplification system. Voting and data management features could be done by linking to the PC where the software installed. Supports 6 cameras by bonding together with the TS-0690 Automatic Video Tracking Controller. Ensure the protection of the 8000V static electricity ground line.

The 4-channel power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack type and height 3U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and rated power of 350W per channel that offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and 3U height. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

The digital ambient noise controller is designed to work with the ambient noise sensor to adjust the output level based on the detection of the surrounding ambient noise level.

THE TH-0500M is a wireless infrared conference system controller, the meeting features modes, speech limit, rotation mode. external video device, which allows speaker images tracking the location. The panel has for system setting with four 160x32 dot matrix LCD function keys and setting. Two types of audio signal output terminals that can be an external connected to the recording or audio equipment. Can be installed in a standard 19-inch cabinet.

Mixer Amplifier T-6635 is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

The VA- is firefighter control panel that must be used by the firefighter at the fire center. Fireman control panel communicate with the controller via a CAT5 cable up to 1Kms distance. Four message buttons with security cover are provided to push the alarm. PPT handclip microphone is also provided for the firefighter announcement in case of emergency. Its standard configuration is 16 zones, can be extended to 64 zones of connection with the extension control panel.

Mixer amplifier is suitable for PA applications such as background music, zone paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and rated power of 240W per channel which offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and height 2U. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

The 4-channel power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack mount type height and 2U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

Mixer amplifier is applicable in the bank, mosque, school, hotel, restaurant, theme centers and shopping center. It integrates 2 audio sources into a 5-zone mixer amplifier, plus 3 microphones and an additional auxiliary input. 2 USB ports on the front and rear panel provide easy access and operation of the installer and the end user.

2-channel amplifier with 120W output, built-in 20-byte DSP and built-in delay / repeat / echo and reverb characteristics. Echo & reverb with separate volume control. Extended protection for high temperatures, short circuits and overloads.

The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier with 70V, 100V and 4-16ohm speaker outputs and 4 universal microphone inputs of 1/4 "phone jack and XLR type. Double RCA type line are also provided.The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which ensure the control of the flexible zone.Every 6 inputs are equipped with low / tone controls. A T-318 of the remote zone exchange console 5 is provided for the announcement and control of another location.Master, Mic1-4, volume control line1-2 & 6 separate treble / bass Tone control for each input are provided, as well as microphone 1 priority over the other inputs Each channel input with separate treble and bass control Built -Family for fire alarm system, EMC input , integrated chime, 2/4 tone chime selector, chime remote trigger. The TEL entry could be used as a telephone system on a public address system. The REC output for tape recorder and the PRE output, AMP input for adding processo r additional signal as mixer, graphic equalizer. Complete protection includes short circuits and thermal protection, current limiter and overload.

Mixer amplifier is suitable for PA applications such as background music, area paging and control. It features a built-in weekly timer to easily enjoy the programmed music system and school sound system through a remote control. It incorporates AM / FM tuner, CD player and MP3 functions. It is ideal for super market, school, retail store, bank, police station, villa, bus and railway station, factory, theme lounge, restaurant, hotel and hospital, etc.

The power amplifier is designed for commercial and industrial sound applications. 3U rack mount design in the type, the nominal power of 500W which offers a wide choice to meet the different needs of the size sound system. The two balanced and unbalanced line inputs make it selectable for the installer, balanced line output powers to another power amplifier as well as secures the signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs are convenient for installation when the different selection of matching speakers. A master volume control is included. Complete protection includes clamp, short circuit, high temperature and overload. Power indications, signal, clip, protection and temperature.

The inputs and outputs can be matrix chosen, so it is a 4-channel integrated high-audio matrix system solution with MP3 player for the hotel, shopping center, sports center, entertainment center, etc.

Each of the inputs can be easily designed for different four zones by the selector of the front panel, in addition each of the inputs are powered with separate bass, treble and volume for a precise sound effect for each zone.

The T-2700 is a built-in stage waterproof horn speaker 70v / 100v transformer. The 70v / 100v transformer technology reduces line losses over longer distances and allows for easy parallel connection of multiple speakers. The 12 "horned speaker driver is designed with a frequency response of 120 to 18 kHz, the rated power output of 150 W can meet different applications varies in room size and ambient noise environment. The metal enclosure and the metal support are black in color. Easy and secure wall mount installation through the supplied mounting bracket. It is the ideal choice for industrial and commercial applications in the vast outdoor area of the station, the stadium where background music and pagination is needed.

The public address base amplifier with rated power of 350W. They are presented with 3 microphone inputs, 2 inputs and 1 at the EMC inputs. priority mute is performed by EMC1 for compelling reasons other inputs except Mic1 on the front panel. Individual gain controls are provided for Mic 1-3 and 1-2 Aux, bass and treble and master volume control are provided for overall tone control. 70V, 100V and low impedance speaker outputs 4-16 ohms are provided. Extensive protection against short circuit, overload and high temperature.

The power amplifier is designed for commercial and industrial sound applications. 3U rack mount design in the type, rated power of 350W which offers a wide choice to meet the different needs of the size sound system. The two balanced and unbalanced line inputs make it selectable for the installer, balanced line output powers to another power amplifier as well as secures the signal transmission is less noise and longer distance. 70V, 100V and 4-16ohm speaker outputs are convenient for installation when the different selection of matching speakers. A master volume control is included. Complete protection includes clamp, short circuit, high temperature and overload. Power indications, signal, clip, protection and temperature.

T-6236B is one with a MIC gooseneck and two portable VHF pickups with 60W built-in amplifier, 60W column speaker with a tweeter and three woofers. A lamp is also provided. A number of input and output makes it easy to increase its capacity. It is available in white or black finish.

2-channel power amplifiers are designed for commercial and industrial PA applications. With two separate amplifier in a single chassis and nominal power of 120W per channel that offers a wide choice to meet the different needs of the size sound system. The amplifier is designed rack-mount type and height 2U. The two balanced and unbalanced line inputs for each channel make it selectable for the installer, the balanced line outputs for each channel jump to another power amplifier as well as securing the signal transmission is less noise and further. 70V, 100V and 4-16ohm speaker outputs for each channel are convenient for installation when the different selection of matching speakers. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Power indications, signal, clip, protection and temperature.

Amplificateur comprend 3 entrées microphone, 2 entrées auxiliaires et une entrée CEM. Il a un port USB et un écran fluorescent pour afficher le numéro de son. Il est adapté pour le système de musique d'échange et de fond. Il a une température élevée, surcharge et protection contre les courts-circuits.

The power amplifier is designed for commercial and industrial PA applications. With four separate amplifier in a single chassis and nominal power of 60 W per channel that offers a wide choice to meet the different needs of the audio system size. The amplifier is designed rack mount type height and 2U. Balanced line inputs via telephone jack, 70V, 100V and 4-16ohm speaker outputs for each channel by Phoenix types are convenient for installation when the corresponding different selection of the speaker. Master volume controls for each command are included. Complete protection includes more heat, more charge, clip & short circuit. Indications for power, signal, peak and protection.

VA-2000FM is used remotely the firefighter microphone with VA-2000 voice evacuation system, the system's ability to nine microphone inputs remotely for both microphone and a remote firefighter microphone. Fireman microphone is equipped with a PTT-clip hand microphone high sensitivity for easy hand use. Different priority could be set up from the software to ensure that the queue exchange system. Microphone's status could be constantly monitored and displayed. Firefighter microphone could be placed at the fire department, room, distance from the controller up to 1Kms by CAT5 cable. It is used by the firefighter to activate predefined evacuation messages to the designated area or all zones in the emergency room. EVAC, ALERT, TEST and CLEAR ALL four voice message buttons with covers to ensure the protection from mishandling. Each 16-zone firefighter microphone capacity, while the zone extension panel (8 zones) can be interconnected for expansion of the zone, up to 64 zones.

Processor is designed by the latest digital technology, in collaboration with the meeting host, delegate unit and software. Support many cameras. The can communicate with RS232 socket equipment, such as computer or video switching matrices. Support for many types of meeting mode in free chat mode, FIFO mode and speech limit mode.