DYNACORD - PCL 1415/230V, Professional 4 × 150 W Power Amplifier

Features

- Professional four-channel power amplifier

- Rated output of 4 × 150 W into 4 ohms

- Rated output of 4 × 75 W into 8 ohms

- Maximum output of 4 × 160 W into 4 ohms

- Maximum output of 4 × 100 W into 8 ohms

- Dynamic single-channel output up to 200 W into 4 ohms

- Dynamic single-channel output up to 120 W into 8 ohms

- Bridged output up to 315 W into 8 ohms per channel pair

- Independent operation of A/B and C/D channel pairs

- Dual, Parallel and Bridged operating modes

- Independent level adjustment for every channel

- Electronically balanced audio inputs

- Secure Phoenix-style screw-lock connectors

- Low-impedance loudspeaker connections

- Switchable high-pass filter for each channel pair

- Selectable 50 Hz or 300 Hz cut-off frequencies

- OFF position for bypassing the high-pass filter

- 12 dB-per-octave high-pass filter slope

- Low-leakage toroidal power transformer

- Extensive headroom for audio signal peaks

- Integrated dynamic audio limiters

- High-temperature protection

- Short-circuit protection

- Peak-current limiting circuits

- Inrush-current limiting during start-up

- Delayed loudspeaker output activation

- Independent protection circuits for each channel

- Power, Protect and Limit LED indicators

- -30 dB and -10 dB level indicators

- Low-noise active cooling system

- Direct front-to-rear airflow

- Reliable thermal stability for professional operation

- Rugged 19-inch rack-mount chassis

- Compact two-rack-unit installation

- Designed for fixed installations and multi-zone systems

Specifications

- Brand: DYNACORD

- Model: PCL 1415/230V

- Series: PCL Contractor Line

- Product type: Professional power amplifier

- Number of channels: 4

- Supported load impedances: 4 ohms and 8 ohms

- Rated output into 4 ohms: 4 × 150 W

- Rated output into 8 ohms: 4 × 75 W

- Maximum output into 4 ohms: 4 × 160 W

- Maximum output into 8 ohms: 4 × 100 W

- Dynamic single-channel output into 4 ohms: 200 W

- Dynamic single-channel output into 8 ohms: 120 W

- Maximum bridged output into 8 ohms: 315 W per channel pair

- Maximum RMS voltage swing: 32.1 V

- Voltage gain at 1 kHz: 30 dB

- Input sensitivity: 0 dBu / 775 mV

- Input impedance: Greater than 20 kΩ, balanced

- Frequency response: Below 10 Hz to 40 kHz, -1 dB

- Power bandwidth: Below 10 Hz to above 50 kHz

- Total harmonic distortion: Below 0.1%

- IMD-SMPTE distortion: Below 0.1%

- DIM30 distortion: Below 0.1%

- Crosstalk at 1 kHz: Below -75 dB

- A-weighted signal-to-noise ratio: 101 dB

- Damping factor into 4 ohms: Greater than 250

- Slew rate: 16 V/µs

- Operating modes: Dual, Parallel and Bridged

- High-pass filter: OFF, 50 Hz or 300 Hz

- High-pass filter slope: 12 dB/octave, Butterworth

- Audio inputs: 4 balanced inputs

- Loudspeaker outputs: 4 low-impedance outputs

- Connector type: Locking Phoenix-style screw terminals

- Indicators: Power, Protect, Limit, -30 dB and -10 dB

- Protection circuits: Audio limiters, temperature, short circuit and peak current

- Additional protection: Inrush-current limiting and output turn-on delay

- Cooling system: Variable-speed active ventilation

- Airflow direction: Front to rear

- Power supply: 230 V, 50/60 Hz

- Power consumption at 1/8 maximum output: 385 W

- Safety class: Class I

- Installation: Standard 19-inch rack, 2U

- Dimensions: 483 × 88 × 405 mm

- Weight: 18 kg