Dynacord - PM2200-3-UNIV, 22-Channel PowerMate Powered Mixer with 2 x 1000 W

Features

- Professional PowerMate powered mixing console

- Largest model in the PowerMate 3 range

- Twenty-two versatile audio-input channels

- Eighteen mono microphone or line channels

- Four microphone or stereo-line channels

- Twenty-two low-noise discrete microphone preamplifiers

- Balanced XLR microphone inputs

- Line inputs for instruments and external audio sources

- Group-switchable 48 V phantom power

- Switchable low-cut filters on mono channels

- Switchable Voice filter for improved intelligibility

- Three-band equalizer on every input channel

- Sweepable midrange control on mono channels

- Fixed midrange control on stereo channels

- Insert connection on every mono channel

- Inserts can operate as pre-EQ direct outputs

- Extended gain adjustment for every channel

- Signal-present and peak-level indicators

- Independent Mute function on every channel

- PFL button for pre-fader monitoring

- Professional dust-protected channel faders

- Six auxiliary buses for flexible signal routing

- Two dedicated pre-fader monitor buses

- Two dedicated post-fader effects buses

- Two AUX buses switchable pre or post-fader

- Two independent stereo multi-effects processors

- Professional 24/48-bit effects processing

- One hundred integrated factory effects presets

- Twenty editable user-preset memories

- Tap Delay function for tempo adjustment

- Effects control through an optional footswitch

- Effects control through the integrated MIDI interface

- High-contrast graphical OLED display

- 128 x 64-pixel display resolution

- Eleven-band stereo graphic equalizer

- Equalizer assignable to master or monitor outputs

- Independent feedback filters for Monitor 1 and 2

- Adjustable feedback-filter frequency

- Narrow-band feedback attenuation of 9 dB

- Integrated Dynacord LPN loudspeaker processing

- High, Medium and Flat LPN settings

- Optimizes connected loudspeaker transient response

- Integrated high-output stereo power amplifier

- Efficient digital Class D amplifier technology

- 2 x 1000 W output into 4 Ω

- Maximum 2 x 1350 W output into 2.66 Ω

- Lightweight high-efficiency switch-mode power supply

- Universal 100 to 240 VAC operation

- Adjustable long-term RMS output limiter

- Configurable protection for connected loudspeakers

- Integrated amplifier audio limiters

- Short-circuit protection

- High-temperature protection

- DC and high-frequency protection

- Peak-current limiting protection

- Back-EMF protection

- Mains overvoltage and undervoltage protection

- Power-on delay protection

- Continuously variable-speed cooling fans

- Integrated USB 2.0 digital audio interface

- Four simultaneous USB recording channels

- Four simultaneous USB playback channels

- Professional 24-bit digital conversion

- Maximum 96 kHz sampling rate

- Functions as an audio interface for PC or Mac

- Configurable Live and Studio USB routing

- MIDI interface with five-pin input and output

- Left and right Master A outputs

- Stereo or mono Master B output

- Pre-fader or post-fader Master B operation

- Master B suitable for subwoofers and side fills

- Independent Monitor 1 and Monitor 2 outputs

- Monitor outputs available through XLR and jack

- Dedicated FX and AUX outputs

- Direct inputs for the internal power amplifier

- Internal amplifier can power passive stage monitors

- RCA 2-Track inputs for external playback sources

- RCA recording outputs

- Headphone output with level control

- Monitoring of the master mix or PFL channels

- Standby mode for muting the main outputs

- Break-music playback available during Standby

- Professional Speakon loudspeaker outputs

- Connection for an optional 12 V gooseneck lamp

- Rugged cover protecting the controls

- Recessed side handles for transportation

- Durable construction for mobile applications

- Suitable for concerts, events and professional installations

Specifications

- Brand: Dynacord

- Commercial model: PM2200-3-UNIV

- Official CTN: DC-PM2200-3-UNIV

- Product number: F.01U.131.115

- Product range: PowerMate 3

- Product type: Professional powered mixer

- Total number of channels: 22

- Mono Mic/Line channels: 18

- Mic/Stereo-Line channels: 4

- Number of microphone preamplifiers: 22

- Total auxiliary buses: 6

- Pre-fader monitor buses: 2

- Post-fader effects buses: 2

- Switchable pre/post-fader AUX buses: 2

- Amplifier technology: Class D

- Dynamic output into 2.66 Ω: 2 x 1600 W

- Dynamic output into 4 Ω: 2 x 1250 W

- Dynamic output into 8 Ω: 2 x 675 W

- Continuous 1 kHz output into 2.66 Ω: 2 x 1350 W

- Continuous 1 kHz output into 4 Ω: 2 x 1150 W

- Continuous 1 kHz output into 8 Ω: 2 x 650 W

- Dual-channel 1 kHz output into 2.66 Ω: 2 x 1350 W

- Dual-channel 1 kHz output into 4 Ω: 2 x 1000 W

- Dual-channel 1 kHz output into 8 Ω: 2 x 600 W

- Rated 20 Hz to 20 kHz output into 4 Ω: 900 W per channel

- Rated 20 Hz to 20 kHz output into 8 Ω: 450 W per channel

- Maximum output voltage: 74 V RMS

- Microphone input to Master THD: Less than 0.005%

- Power-amplifier input to speaker-output THD: Less than 0.075%

- DIM 30 distortion: Less than 0.05%

- IMD-SMPTE distortion: Less than 0.15%

- Mixer input-to-output frequency response: 15 Hz to 70 kHz

- Input-to-speaker-output frequency response: 20 Hz to 30 kHz

- Amplifier left-to-right crosstalk: Less than -85 dB

- Channel-to-channel crosstalk: Less than -80 dB

- Mute and Standby attenuation: Greater than 100 dB

- Fader and send attenuation: Greater than 85 dB

- Microphone-input CMRR at 1 kHz: Greater than 80 dB

- Microphone-input sensitivity: -74 dBu / 155 µV

- Mono line-input sensitivity: -54 dBu / 1.55 mV

- Stereo line-input sensitivity: -34 dBu / 15.5 mV

- Stereo CD-input sensitivity: -34 dBu / 15.5 mV

- Power-amplifier input sensitivity: +8 dBu / 1.95 V

- Maximum microphone-input level: +21 dBu

- Maximum mono line-input level: +41 dBu

- Maximum stereo line-input level: +30 dBu

- Maximum level of other inputs: +22 dBu

- Maximum level of other outputs: +22 dBu

- Microphone-input impedance: 2 kΩ

- Insert-return impedance: 3.3 kΩ

- 2-Track and CD-input impedance: 10 kΩ

- Other input impedance: Greater than 15 kΩ

- Headphone-output impedance: 47 Ω

- Other output impedance: 75 Ω

- Equivalent microphone-input noise: -130 dBu A-weighted

- Power-amplifier signal-to-noise ratio: 105 dB A-weighted

- Low-frequency equalizer: ±15 dB at 60 Hz

- Mono-channel midrange equalizer: ±15 dB from 100 Hz to 8 kHz

- Stereo-channel midrange equalizer: ±12 dB at 2.4 kHz

- High-frequency equalizer: ±15 dB at 12 kHz

- Master equalizer: Eleven-band stereo graphic EQ

- Master-EQ frequencies: 63, 125, 250, 400, 630 Hz, 1, 1.6, 2.5, 4, 6.3 and 12 kHz

- Master-EQ adjustment range: ±10 dB

- Mono-channel low-cut filter: 80 Hz, 18 dB/octave

- Voice filter: Switchable

- Monitor feedback-filter range: 70 Hz to 7 kHz

- Feedback-filter attenuation: -9 dB

- Loudspeaker processing: Configurable LPN

- Effects processors: Two stereo multi-effects processors

- Effects resolution: 24/48-bit

- Factory effects presets: 100

- User-preset memories: 20

- Time-effects function: Tap Delay

- Effects remote control: Footswitch and MIDI

- Display: 128 x 64-pixel OLED

- USB audio interface: 4 inputs / 4 outputs

- USB conversion: 24-bit

- USB sampling rates: 44.1, 48, 88.2 and 96 kHz

- USB connector: Female USB 2.0 Type B

- MIDI interface: Five-pin DIN input and output

- Phantom power: Group-switchable 48 VDC

- Loudspeaker-protection limiter: Adjustable long-term RMS limiter

- Cooling system: Continuously variable-speed fans

- Mains power supply: 100 to 240 VAC

- Mains frequency: 50 to 60 Hz

- Power-supply type: Auto-ranging switch-mode supply

- Power consumption at one-eighth maximum output: 450 W into 4 Ω

- Electrical safety class: Class I

- Operating ambient temperature: +5 °C to +40 °C

- Dimensions without cover: 818.5 x 155 x 498.5 mm

- Net weight without cover: 18 kg

- Shipping weight: 22 kg

- Loudspeaker connectors: Professional Speakon outputs

- Compatible lamp: Optional Dynacord DC-LITLITE-4P

- Compatible footswitch: Optional Dynacord DC-FS11

- Compatible dust cover: Optional Dynacord DC-SH2200-3

- Package contents: PowerMate, two-meter mains cable, manual, quick-start guide and documentation