Yamaha - STAGEPAS 600BT, 680 W Portable PA System with Bluetooth and 10-Channel Mixer, 10''

Features

- Complete all-in-one portable PA system

- 680 W total dynamic output

- 560 W total continuous output

- 340 W + 340 W dynamic amplification

- 280 W + 280 W continuous amplification

- Two passive two-way speakers included

- 10-inch woofer in each speaker

- 1.4-inch voice coil HF compression driver

- Two-way Bass-Reflex speaker design

- 55 Hz to 20 kHz frequency response

- Maximum 129 dB SPL per speaker

- 90° horizontal nominal coverage

- 60° vertical nominal coverage

- 50° floor monitor angle

- Detachable ten-channel powered mixer

- Four mono microphone / line inputs

- Six mono or three stereo line inputs

- Switchable stereo / mono input channels

- Hi-Z input available on Channel 4

- Direct guitar and bass connection

- Integrated wireless Bluetooth audio streaming

- Bluetooth version 4.1

- Bluetooth A2DP version 1.2

- Maximum Bluetooth range approximately 10 meters

- Streams audio from smartphones and tablets

- Integrated Yamaha SPX digital reverb

- Four selectable reverb programs

- Adjustable reverb parameters

- Reverb control via optional footswitch

- Integrated feedback suppressor

- Automatically suppresses problematic feedback frequencies

- Three-band EQ on mono channels

- HIGH shelving control at 8 kHz

- MID peaking control at 2.5 kHz

- LOW shelving control at 100 Hz

- Integrated 1-Knob Master EQ

- Simple overall tone optimization

- Integrated Virtual Bass Boost

- Quickly optimizes speech or music

- Integrated +30 V phantom power

- Phantom power on Channels 1 and 2

- Compatible with condenser microphones

- Dedicated left and right speaker outputs

- L/Mono and R Monitor outputs

- Dedicated mono Subwoofer output

- Automatic high-pass filter with connected subwoofer

- Compatible with powered subwoofers

- Compatible with powered monitor speakers

- Reverb footswitch connection

- Compatible with optional Yamaha FC5

- Mixer can mount on microphone stand

- Compatible with optional Yamaha BMS10A adapter

- StageLok speaker pole sockets

- Compatible with approximately 35 mm poles

- Integrated top handle on each speaker

- Mixer stores inside speaker cabinet

- Fast and simple system setup

- Two speaker cables included

- AC power cable included

- Non-slip pads included

- Ideal for live performances and concerts

- Suitable for DJs and events

- Suitable for conferences and presentations

- Excellent for rehearsals and mobile PA use

Specifications

- Brand: Yamaha

- Model reference: STAGEPAS 600BT//E

- Model: STAGEPAS 600BT

- Series: STAGEPAS

- Type: Portable PA system

- Configuration: Powered mixer + 2 passive speakers

- Mixer channels: 10

- Mono microphone / line inputs: 4

- Additional line inputs: 6 mono / 3 stereo

- Hi-Z function: Channel 4

- ST/MONO switching: Channels 5/6 through 9/10

- Phantom power: +30 V

- Phantom-powered channels: CH1 / CH2

- Bluetooth: Version 4.1

- Bluetooth profile: A2DP v1.2

- Maximum Bluetooth range: Approx. 10 m

- DSP: SPX digital reverb

- Reverb programs: 4

- Feedback suppressor: Yes

- Master EQ: 1-Knob Master EQ

- HIGH EQ: 8 kHz shelving

- MID EQ: 2.5 kHz peaking

- LOW EQ: 100 Hz shelving

- Total dynamic output power: 680 W

- Dynamic output power: 340 W + 340 W

- Total continuous output power: 560 W

- Continuous output power: 280 W + 280 W

- Speaker type: Two-way Bass-Reflex

- LF driver: 10-inch / 25 cm cone

- HF driver: 1.4-inch voice coil compression driver

- Frequency range (-10 dB): 55 Hz – 20 kHz

- Maximum output level: 129 dB SPL per speaker

- Horizontal coverage: 90°

- Vertical coverage: 60°

- Floor monitor angle: 50°

- Speaker outputs: SPEAKERS OUT L / R

- Monitor outputs: L/MONO / R

- Subwoofer output: Mono

- Automatic subwoofer HPF: Yes

- Footswitch connection: Reverb On/Off

- Speaker pole socket: StageLok 34.8–35.2 mm

- Power requirements: AC 100–240 V, 50/60 Hz

- Idle power consumption: 35 W

- Power consumption at 1/8 output: 100 W

- Speaker dimensions: 335 × 545 × 319 mm

- Mixer dimensions: 348 × 197 × 135 mm

- Weight per speaker: 10.9 kg

- Mixer weight: 3.8 kg

- Total system weight: 25.6 kg

- Handle: 1 top handle per speaker

- Included speaker cables: 2 × 6 m

- Included power cord: 2 m

- Included non-skid pads: 12

- Included ferrite cores: 2

- Included cable ties: 2

- Optional adapter: Yamaha BMS10A

- Optional footswitch: Yamaha FC5